Tan Brown mineral pattern
Tan Brown combines a dark granular ground with rust-brown patches and pale mineral speckles. Larger brown areas interrupt the finer background, giving a broad countertop or wall face a different rhythm from a uniformly fine gray granite. The position and balance of those areas vary across the selected material.
Countertops show the pattern across one horizontal surface, wall panels divide it with vertical joints, and repeated floor pieces make a smaller module with more joints. Cut-piece size sets how much of the brown-and-dark pattern each installed piece shows.
A front face and an exposed end meet at a corner, and their finish and pattern relationship matter even with a narrow joint. List countertop fronts, wall-panel returns and free ends individually, so every finished face meets a finished edge.
Polished granite has a reflective face, and on a dark stone the reflected windows and light fittings become part of the surface alongside the brown mineral pattern. It suits designs where sheen and grain both take a strong role.
Honed granite has a lower-gloss face, reducing sharp reflections across broad surfaces. The material retains its mineral pattern while the surface reads more quietly under room lighting. A honed face can be coordinated with lower-gloss cabinetry or wall finishes without changing the named stone.
A finished front, return or sink-opening edge has its own finishing work, while a concealed edge stays plain. Carry the chosen sheen around every exposed edge the layout calls for.
| Named material | Tan Brown natural granite |
|---|---|
| Selected face finish | Tan Brown natural granite with a polished face |
| Pattern | Dark granular ground with rust-brown mineral patches and pale speckles |
| Face finish choices | Polished or honed |
| Finished piece dimensions | Cut to project length and width; customizable thickness. Each piece carries dimensions in mm or inches. |
| Applications | Countertops, wall panels and floor pieces, with application-specific layout and support |
| Fabrication | Panel sequence, exposed fronts and ends, returns, joints and fixture openings |
| Minimum order | Made to your project quantities. Small item counts are accepted when they ship with the rest of your project list; the quotation confirms the quantity for each item. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
Give adjoining panels references and view their faces together, since a large brown patch near a joint balances differently from smaller patches spread across the wall. The sequence follows the actual stone and the wall layout.
The elevation drawing separates panel width W and height H from finished thickness T in section. A cutting list records these dimensions for each piece in mm or inches. The available slab format and cutting arrangement are separate from the dimensions of the installed panels.
For countertop pieces, the sink or basin mounting arrangement determines its opening and the treatment of the cut edge. Faucet holes, narrow sections beside openings and exposed end returns belong on the fabrication layout. Cabinets, brackets and substrates provide a separate supporting system.
The position of each finished piece within the selected material affects yield. Coordinating a wall elevation or a large uninterrupted top can use a different cutting arrangement from repeated small floor pieces. The piece schedule and pattern selection establish the material quantity together.
Count the lengths of finished fronts, ends, returns and opening edges. A rectangular panel with concealed sides takes different work from a countertop with finished ends and a sink opening, and thickness and corner treatment are recorded with each piece reference.
Surface work follows the chosen finish and the faces receiving it. Wall panels may have concealed backs and edges, while an exposed countertop return may need finishing on more than one face. Separate those areas when comparing the two finish packages.
Crates and handling follow the actual piece sizes and shipment contents. Freight, unloading, setting materials and installation are separate cost items. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
Its dark granular background contains rust-brown mineral patches and pale speckles. The distribution changes across natural pieces. A broad countertop and a small floor piece therefore show different amounts of the same material pattern.
Polished has a reflective face that picks up windows and light fittings. Honed has a lower-gloss face. Both choices retain the named stone; face sheen, exposed edges and surrounding finishes are coordinated as separate selections.
Yes. They can be selected and sequenced for a coordinated appearance. Natural patterning varies from panel to panel, which is part of the stone's character. Panel references and a face layout preserve the intended order through fabrication and installation.
Pieces are cut to project dimensions, with customizable thickness. The piece schedule defines finished length, width and thickness. Available slab dimensions and the cutting layout determine how those pieces are obtained from the selected material.
Yes. The actual sink or basin template and mounting arrangement establish the opening. Exposed cutout edges, faucet holes, nearby joints and support requirements form part of that countertop detail.
Yes. Honed granite has a smooth matte surface that suits interior floors. For wet or exterior floors we recommend a flamed or brushed finish and supply the slip test result for the finish you choose.
Granite Sink Worktops with Grooved Drainer Cuts
Black Galaxy Granite Slabs
Blue Pearl Granite
603 Granite Slabs