Pull-out basin faucet configuration
The spray head sits in a low spout for ordinary basin use and pulls forward for directed rinsing. The selected layout has a manual lever beside the spout and a compact deck-mounted base. It brings the outlet closer to the bowl than a tall kitchen-style arch; clearance over a vessel basin therefore needs particular attention.
The head connects to a braided return hose. The selected hose-extension basis is 20 in (508 mm), with its usable travel dependent on the route below the deck. The hose and return weight need an unobstructed path. A vanity drawer, trap, shelf or stored cleaning bottle can prevent the head from returning even when the faucet fits above the sink.
The selected spray head switches between an aerated stream and a blade spray with a thumb toggle. Magnetic docking holds the head at the spout when it is returned. The actual head, hose, dock and return parts are selected together.
With the head returned to the spout, the outlet serves normal washing at one fixed position. The aerated stream is the everyday selection. Spout reach and deck-to-outlet height locate that stream in the bowl, while the lever still needs room to move without hitting the wall or mirror ledge.
Pulling the head out changes where the water can be directed. The spray selection is useful for rinsing the basin walls and corners, while the stream concentrates water into a smaller area. Keep the head above the bowl and select the required backflow protection for the installation; a pull-out hose is not a separate bidet or shower system.
The selected appearance is matte black across the body, lever and spray head. Surface reference and sheen are coordinated together so a replacement head does not stand out against the faucet body.
| Faucet configuration | Low-arch deck-mounted manual basin faucet with detachable pull-out spray head and side lever |
|---|---|
| Selected appearance | Low-arch deck-mounted faucet with a manual lever, detachable spray head and braided weight-return hose; selected matte-black appearance. |
| Selected hose extension | 20 in (508 mm) selected extension basis; braided return hose with a clear travel path below the basin |
| Spray choices | Aerated stream and blade spray through the selected head’s thumb toggle |
| Return & docking | Weight-return hose and selected magnetic dock; head, hose and return parts specified as a matched set |
| Basin fit dimensions | Actual deck-to-outlet height, mounting-center-to-outlet reach, overall height and base/drilling dimensions in mm |
| Installation interface | Deck thickness, lever sweep, trap/drawer clearance, supplied connections and local water/backflow requirements scheduled together |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The low spout is considered with the actual basin rim and bowl depth. Measure reach from the mounting center to the docked outlet and height from the deck to that outlet. A low faucet behind a tall vessel rim can leave too little room for hands even though its base fits on the countertop.
The hose loop and return weight move beneath the basin. Their path stays clear of the trap, cabinet rails, drawers and shutoff valves through the full travel. Connections remain accessible for service. The 20 in selected extension is not a promise that every crowded vanity will provide 20 in of usable movement.
The base footprint, drilling and fixing parts are matched to the basin or countertop thickness, and the lever sweeps clear of the backsplash and wall. The connection and cartridge package is listed alongside the hose, with installation and backflow requirements suited to the local water system.
The faucet body, manual lever, detachable spray head and finish form the assembly. A taller chrome body is a different configuration with its own dimensions.
The hose length, return parts, spray modes and magnetic dock are included as a matched package. A different hose or head affects movement and docking, so those components remain identified together in the supplied list.
The actual fixing set, supply-connection parts and any hoses are itemized. The basin waste, trap, supply stops and any separate temperature-limiting or backflow device are identified independently. The faucet does not include the whole vanity plumbing by default.
The order gives quantity and surface reference, with head and lever protected in packing, and destination and receiving are delivery details. Under-basin access and local fitting are installation tasks. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The head detaches from the spout so water can be directed around the bowl. When docked, it works at one fixed outlet position. The extra hose movement requires clear space below the basin that a fixed-spout faucet does not need.
The hose extension is based on 20 in (508 mm). Usable movement also depends on the hose path, return weight and anything beneath the basin, so the under-deck layout must leave room for the full motion.
The selected head offers an aerated stream and a blade spray through a thumb toggle. The stream serves routine washing; the handheld spray directs water around the bowl. The head and hose remain a matched package, with the required flow and water-system documentation specified for the project.
Only where the actual rim height and bowl position leave enough outlet and hand clearance. A tall vessel rim may need a different faucet height. The fit drawing distinguishes deck-to-outlet height from overall body height and spout reach.
The hose or return weight can catch on a trap, drawer, shelf, shutoff valve or stored item. The head also needs the correct dock and connection parts. A clear hose path and matched components are required; magnetic docking does not remove an obstruction below the sink.
The waste, trap, supply stops and any temperature-limiting or backflow components are included only when listed. The faucet supply lists the head, hose, return, docking, fixing and connection parts so they can be coordinated with the basin.
Three-Hole Widespread Bathroom Faucet with Crystal Rose Handles
Crystal-Handle Single-Hole Bathroom Faucets
Wall-Mounted Basin Faucet with Round Escutcheons
BF-3004 Deck-Mounted Bath Filler with Hand Shower