JT159 mixed-rib profile
JT159 uses a repeated combination of larger rounded ridges and finer line features. The mixed face creates a different rhythm from the uniform fine profile of JT165. Its listed 159 mm overall width and 14 mm overall thickness identify the selected section.
The standard length is 3000 mm and the listed body material is wood-plastic composites. Lamination, hot and cold pressing, and side slotting form the stated process. The laminated face is recorded as a finish reference on the same model line.
Mixed ribs make the relationship between adjacent panels noticeable at a seam. The accepted profile and joined sample establish that transition. The material schedule records the rib geometry, side engagement and matching trim detail for the selected section.
The selected warm neutral laminate follows the rounded ridges and fine line features. The accepted color reference, texture and sheen define the order. Matching edge pieces are scheduled for the same JT159 profile.
The dark option changes the appearance while retaining the 159 × 14 mm WPC body. Its accepted face reference controls the finish through the panel field. A change in laminate does not authorize substitution of the 12 mm JT165 fine-rib section.
Where several walls use the same panel, the face reference, sample and piece labels connect them to one finish schedule. Corner and end trims carry their own matching finish references. Separate wall fields retain their panel counts and cut lengths even when the appearance is shared.
| Model / material | JT159 heterotype / mixed-rib wall panel; Wood-Plastic Composites body with laminated face. |
|---|---|
| Laminated face | JT159 mixed-rib panel, 159 × 14 × 3000 mm, selected warm neutral laminated face; exact color and sheen by sample. |
| Overall dimensions | 159 mm overall width × 14 mm overall thickness × 3000 mm standard length. Net cover by accepted joined sample. |
| Profile / process | Larger rounded ridges alternating with fine line features; laminated surface, hot and cold pressing, side slotting. |
| Layout / openings | Mixed-rib seam alignment, first and last panels, end joints, service cuts and finished lengths by elevation. |
| Finish / backing | Actual face code, texture and sheen by sample. Backing, fixing and movement allowance by site; attached loads independently supported. |
| Supply | Panels, face and joint samples, trims and cuts; backing, fixing products, packing, freight and installation individually scheduled. |
| Minimum order | Supplied in full packing units from one production batch, rounded up from your area. Small lots can ship with the rest of your project list in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The listed 159 mm is overall width. Installed pitch and the visual meeting point of the mixed ribs follow the accepted side joint. The elevation coordinates first and last panels, corners and adjoining materials using that joined module.
The 3000 mm standard length is coordinated with the wall height and run direction. Butt joints between lengths, service openings and access points need their own backing and edge treatment. The cut schedule records where the mixed face is interrupted and where full panels remain.
Backing and fixings are selected for the actual substrate, orientation and access conditions. Fixtures and equipment attach to suitable independent support.
The panel line carries JT159 mixed rib, 14 mm, with the accepted laminate and quantities by finished length. Different wall fields can use one face reference while retaining separate cut lists. The 12 mm fine-rib alternative is priced as a different profile.
Trim quantities follow wall perimeters, corners, openings and exposed ends. The quote identifies joined samples, edge pieces and special cuts individually, since a simple square-meter quantity misses many terminations on a mixed-rib wall.
The named support and fixing products are listed when supplied. Wall leveling, local preparation and installation labor each have an assigned responsibility. Project support details follow the accepted wall assembly, with spacing set for the project.
The accepted face sample and labels keep JT159 sections identifiable during packing and installation. Carton counts, packed dimensions and actual shipment weight are confirmed for the final cut schedule. MOQ, production timing and destination freight are quoted for that order. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
No. JT159 is the 159 × 14 mm profile with larger rounded ridges alternating with finer line features. JT165 is a 165 × 12 mm profile with its own page and a different face rhythm. The accepted model and section stay on the order.
The listed outside size is 159 mm wide, 14 mm thick and 3000 mm long. Installed pitch follows the accepted side engagement. Cut lengths, panel counts and end-joint positions are scheduled for each wall field.
A joined sample establishes the installed module and the transition at the seam. The elevation carries that module through the wall, including the first and last panel and any corner, using net cover from the sample.
They can be scheduled as separate finish lines using the same selected JT159 profile. Each wall or panel group retains its accepted laminate reference and count. The face sample, trim finish and labels identify where each appearance belongs.
Their locations belong on the elevation before the cut list is finalized. Openings need appropriate backing, service access and finished cut edges. A removable access piece also requires an agreed support and removal detail, separate from the continuous panel run.
Face and joined samples, trims, corner pieces, opening cuts, backing, fixings, packing and freight are separate lines. Site preparation and installation responsibilities are stated individually. Carton quantities, actual weight and timing are confirmed for the final order.
KJ150 Bamboo-Fiber Grille Wall Panels, 26 mm
GP-KJ195HC Bamboo-Fiber Wall Panels with Broad Ribs
GP-JT159BYGS WPC Wall Panels with Rounded Ribs
GP-KJ210XY Bamboo-Fiber Wall Panel with Perforated Grooves