Two-basket pull-out hamper
Two removable white baskets sit front to back on one dark-gray carrier frame. Each basket has a 33 L capacity, giving 66 L total for separating laundry. The attached cabinet front moves with the complete carrier. This is a straight pull-out arrangement, with neither a hinged cupboard door in front of the baskets nor a tilt-out hamper flap.
The selected accessory is the HAILO Laundry Carrier 450, reference 3270811. Its covered, damped self-closing slides mount to both cabinet sidewalls and provide synchronized over-travel. The matched package includes the carrier, removable baskets and the applicable front attachment parts. The exact accessory reference stays on the quotation and parts schedule.
The selected cabinet uses 18 mm plywood sides, top and bottom, with a supported 6 mm back. A 450 mm outside width leaves 414 mm between the sides. The selected finished height is 900 mm: a 100 mm plinth, 780 mm cabinet body and 20 mm finished worktop. The carrier is installed to the fitting’s mounting layout within the reserved clear envelope.
The warm-white version uses melamine-faced panels and a flat 18 mm pull-out front with matching finished edges. Its material reference, edge banding and pull are scheduled together, while the carrier keeps its dark-gray metal and white baskets.
The oak-veneer alternate keeps the selected cabinet dimensions, flat-front geometry and carrier package. Grain direction and finished ends are coordinated with neighboring cabinetry. The accepted veneer and clear-finish reference define the face.
The selected front is a plain slab, sized at 446 W × 776 H mm with 2 mm perimeter reveals against the 450 W × 780 H mm cabinet body. It uses the carrier’s flat-front attachment arrangement and adjustment points. A framed front needs its own applicable bracket selection and layout; it is not attached by copying the slab-front hole positions.
| Hamper configuration | One straight pull-out carrier with two front-to-back removable baskets, 33 L each / 66 L total; attached flat front. |
|---|---|
| Cabinet front | Warm-white melamine flat front and finished panels on the plywood cabinet; same two-basket carrier package |
| Selected cabinet | 450 W × 600 D × 900 H mm outside; 18 mm sides give 414 mm clear width. Reserved carrier envelope: 414 W × 560 D × 600 H mm. |
| Selected carrier | HAILO Laundry Carrier 450, ref. 3270811: 412–418 W × 528 D × 545 H mm; 16–19 mm sidewalls; dark-gray metal / white baskets. |
| Body and front | Selected 18 mm plywood body and slab front, supported 6 mm back. 100 mm plinth + 780 mm body + 20 mm worktop = 900 mm. Front 446 W × 776 H mm with 2 mm reveals. |
| Movement and access | Side-mounted covered damped self-closing slides with synchronized over-travel. Exact open projection, cover clearance and upward basket-removal space by the complete assembly. |
| Order contents | Cabinet, front and pull, worktop, plinth and the complete carrier package, each listed. Packing, freight, assembly and site fixing as their own lines. |
| Minimum order | Made to your project quantities. Small item counts are accepted when they ship with the rest of your project list; the quotation confirms the quantity for each item. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The selected 18 mm sides fall within the carrier’s 16–19 mm sidewall range. Its specified 412–418 mm width envelope includes the selected 414 mm cabinet opening. A 560 mm clear depth and 600 mm reserved carrier height exceed the component’s 528 mm depth and 545 mm height. Pipes, rear fixings and other fittings remain outside that reserved space.
The carrier moves both baskets forward together. Each basket lifts out of its support frame, so the open position needs access above both rims as well as space in front of the cabinet. The actual runner travel, fixed cover, worktop projection and handles determine the removal path. A 528 mm system depth is neither a pull-out projection nor a basket-lifting clearance.
The carrier’s front brackets are positioned from the actual cabinet opening and selected front, then adjusted using the fitting instructions. The bottom reveal, pull projection and nearby doors are coordinated with the open carrier. The cabinet is leveled and fixed to suit the room so the loaded pull-out does not rely on a loose freestanding box.
Our quote lists the plywood cabinet, flat front, finished ends, plinth and worktop. Cabinet height, end panels and the white or oak-veneer choice change that material schedule, and the carrier's clear opening is drawn on the cabinet drawing.
The accessory line names the exact carrier reference, both 33 L baskets, matched slides, cover and front attachment parts. A fabric-bag pull-out or a different nominal cabinet size changes the system and its required opening. The selected component is not replaced under a shared capacity label.
The pull, attachment brackets, reveals and fixing details follow the accepted cabinet front. Neighboring worktops and doors can change the installation interface. Any added storage or service panel is shown without reducing the reserved carrier space.
The quote separates cabinet parts, the carrier package, packing and freight. Assembly, site fixing, final front adjustment and worktop installation are individually assigned. The packing list identifies the hardware package and removable baskets with the cabinet they fit. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
No. Both baskets move on one synchronized carrier frame. They sit front to back along the cabinet depth and can be lifted out individually for carrying laundry. Each basket holds 33 L.
The selected inside width is 450 − 2 × 18 = 414 mm. That sits within the exact carrier’s 412–418 mm width envelope, with 18 mm sides within its 16–19 mm range. The ordered cabinet also retains the required clear depth, height and mounting positions.
No. It is the component’s specified system depth. The actual open projection follows the matched runners and installation. Basket removal also needs room above both rims, clear of the worktop, fixed cover and handles.
The selected slab front attaches to the carrier and moves straight outward with it. Its 446 × 776 mm size uses selected 2 mm reveals at the cabinet body. The flat-front bracket arrangement and its adjustments determine the actual attachment.
It needs its own exact fit check. The selected two-basket carrier uses a 414 mm clear cabinet width. A different bag carrier can require a wider opening, other mounting points or different front hardware, even when both products are called laundry pull-outs.
Our quote identifies the cabinet body, selected front and pull, worktop, plinth and exact complete carrier package with two baskets. Packing, freight, assembly, site fixing and adjustment are itemized. No general laundry weight rating is inferred from the basket volume.
Laundry Folding Station with Open Basket Cubbies and a Hanging Rail
Custom Stacked Washer-Dryer Tower Cabinet
Custom Laundry Cabinets with a Drawer-Mounted Folding Ironing Board
Side-by-Side Washer and Dryer Enclosure Cabinets