Textured Fabric Interior
Gray-beige fabric covers the inner chair seat and back. The textile reference defines the surface texture, shade and cleaning instructions. The ottoman top has its own cover reference within the coordinated pair.
Fabric Lounge Chair and Ottoman with Microfiber Outer Panels
Fabric Lounge Chair and Ottoman with Microfiber Outer Panels
- Product type
- Fabric lounge chair with shaped outer panels and a separate matching ottoman.
- Configuration
- Fabric inner seating surfaces, dark saddle microfiber outer-back panels, sponge filling and 304 stainless-steel legs. Chair: approximately 840 × 940 × 870 mm; ottoman: approximately 640 × 560 × 380 mm, with its cover and trim coordinated on their own.
- Ottoman overall size
- 25.2 W × 22.05 D × 14.96 H in; approximately 640 W × 560 D × 380 H mm.
Fabric Seating and Shaped Microfiber Panels
A Contoured Upholstered Chair
The tall curved back and seat are upholstered as a soft inner seating surface. A dark shaped outer panel wraps the back and sides, with an outlined edge that shows the two-material construction from across the room.
A Separate Matching Ottoman
The padded ottoman stands independently on slender legs. Its curved top and dark outer band echo the chair, while its smaller footprint allows it to be positioned independently for access to the seat. Our order confirmation identifies both components and their quantities.
Microfiber, Fabric and Steel Legs
The material combination uses fabric inside, saddle microfiber leather at the outer back, sponge filling and 304 stainless-steel legs. The accepted schedule coordinates the ottoman trim with the chair materials, keeping the textile and microfiber references distinct.
Coordinated Fabric, Microfiber and Metal
Dark Microfiber Outer Panels
Dark microfiber panels form the chair’s outer back and outline its curved sides. They contrast with the fabric seating surface. The ottoman’s dark trim is listed on its own, including its material reference, edge treatment and sheen.
Slender Metal Supports
The chair and ottoman use coordinated slender supports. Stainless steel grade 304 is specified for the legs; the order identifies the surface finish, connections and floor-contact details for the pair.
Chair and Ottoman Component Specifications
| Product type | Fabric lounge chair with shaped outer panels and a separate matching ottoman. |
|---|---|
| Configuration | Fabric inner seating surfaces, dark saddle microfiber outer-back panels, sponge filling and 304 stainless-steel legs. Chair: approximately 840 × 940 × 870 mm; ottoman: approximately 640 × 560 × 380 mm, with its cover and trim coordinated on their own. |
| Chair overall size | 33.07 W × 37.01 D × 34.25 H in; approximately 840 W × 940 D × 870 H mm. |
| Ottoman overall size | 25.2 W × 22.05 D × 14.96 H in; approximately 640 W × 560 D × 380 H mm. |
| Upholstery | Fabric inner chair surfaces with saddle microfiber outer-back panels; ottoman top and trim references listed on their own. |
| Legs and filling | 304 stainless-steel legs and sponge filling; support finish and floor-contact details recorded by component. |
| Room coordination | Chair seat height, ottoman top height, spacing, floor-contact details and component quantities coordinated for the room. |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
Chair and Ottoman Layout and Access
Separate Dimensions for Each Piece
The chair is approximately 840 mm wide, 940 mm deep and 870 mm high. The separate ottoman is approximately 640 mm wide, 560 mm deep and 380 mm high. The furniture plan shows both outside footprints and the gap between them.
A Gap and Side Approach
Place the ottoman to suit the seating position while keeping a usable side route into the chair. Show both footprints and their spacing on the furniture plan. The chair depth does not include the space occupied by the separate ottoman.
Height and Floor Coordination
The ottoman stands approximately 380 mm high. Its position and the chair’s actual sitting height establish the footrest arrangement. The 870 mm overall chair height describes the back; floor-contact details are coordinated with the finished flooring.
Two-Material Chair and Ottoman Quote
Component Quantities
The quotation states the chair and ottoman counts as two figures. A room schedule can use a different ratio, provided each item and its upholstery reference remain identified.
Fabric and Microfiber Selection
The inner fabric and outer microfiber are separate material selections. Their composition, finish and required appearance range affect the quote; matching trim on the ottoman is recorded with the same material schedule.
Leg Finish and Foot Details
The 304 stainless-steel legs, surface finish and selected floor-contact detail form part of the coordinated pair. Any special connection or protective glide requirement is itemized against the relevant component.
Packing and Shipment
The curved chair shell, padded ottoman and projecting legs need protection as individual pieces. The quotation states component packing, shipment terms and any requested destination handling.
Fabric Chair and Ottoman Supply Items
- Chair
- Complete upholstered lounge chair with fabric interior, microfiber-leather outer back, sponge filling and 304 stainless-steel legs.
- Ottoman
- Separate matching upholstered ottoman at approximately 640 × 560 × 380 mm overall; trim and cover references recorded in the schedule.
- Material selections
- Accepted fabric, microfiber, edge treatment, support finish and selected floor-contact details coordinated across the pair.
- Packing and shipment
- Protective component packing and the agreed transport and destination handling, stated in the quotation.
Fabric and Microfiber Seating Pair Questions
Are the chair and ottoman both included?
The selected configuration contains a chair and matching ottoman. The quotation states separate component counts, allowing the room schedule to specify additional chairs or footrests as required.
What are the dimensions of each piece?
The chair is approximately 840 W × 940 D × 870 H mm. The separate ottoman is approximately 640 W × 560 D × 380 H mm. The chair footprint does not include the ottoman or the space between the two pieces.
Is the dark outer material genuine saddle hide?
The specified outer-back material is saddle microfiber leather, a synthetic upholstery material. Its accepted reference defines color, sheen and edge treatment, independent of the inner fabric.
How are the upholstery surfaces coordinated?
The chair’s inner fabric and outer microfiber have separate material references. The ottoman top cover and dark trim are coordinated alongside them. Edge treatment and support finish complete the material package.
What should the furniture plan show?
Show the chair and ottoman as separate footprints, their spacing and a usable side approach to the seat. Keep the room circulation route clear and coordinate the finished-floor contact details.
What information is needed for a quotation?
Send chair and ottoman quantities, room allocation, fabric and microfiber references, metal finish and destination. Include the furniture layout and any special glide or shipment-handling requirement.
More Lounge Chairs & Ottomans
Leather Lounge Chair with Draped Side Panels
Leather Lounge Chair with a Curved Shell and Tapered Metal Supports
Bench with an Ash-Wood Base and a Separate Fabric Cushion
Shaggy Wool Accent Chair with Slender Metal LegsGuides for specifying lounge chairs & ottomans
Request a Quote for the Fabric Chair and Ottoman
Fabric Lounge Chair and Ottoman with Microfiber Outer PanelsFabric Chair and Ottoman with Dark Microfiber Panels