Gray TV console
The low horizontal cabinet combines gray textured fronts at each end with a dark top surface, finished with a low raised edge along the rear and ends. The closed fronts keep stored items out of the central display zone; their opening method, internal fittings and storage dimensions are confirmed for the ordered cabinet.
Open compartments occupy the center of the console, with horizontal shelves and a lower divided area. This arrangement gives media devices and frequently used accessories an accessible position between the enclosed end sections. Usable opening width, height and depth must accommodate the actual equipment, including projecting controls and connectors. Shelf adjustment and load capacity are separate specifications for the supplied cabinet.
A round cable-access opening sits behind the upper central storage area, so cables run from the media equipment to the room connections. The order sets out the cable route, opening positions and connector space. Power strips, outlets, device installation and extra cable openings are added to the package when you need them.
The front surfaces have a gray brushed-metal appearance with a crossing texture pattern. This creates a different visual character from a flat painted panel or a timber-grain cabinet. The selected finish reference establishes the gray tone, texture and sheen for the order. The appearance is kept separate from the underlying panel material.
Dark surfaces cover the long top and central open compartments, against the lighter textured fronts. The interior finish matters where equipment leaves part of a shelf open, and edge treatment and the finish inside enclosed storage are part of the cabinet specification.
Repeat consoles use the same gray and dark finish references, with quantities listed room by room. Equipment can differ between rooms while the cabinet finish stays the same. A change to cabinet size, front treatment or storage layout is confirmed as its own configuration. The console is offered in one gray finish.
| Console configuration | Single low TV console with textured closed fronts at the ends, central open shelves and a round cable-access opening. |
|---|---|
| Selected appearance | Single gray TV console with a brushed-metal appearance on the textured fronts, dark central open shelves and cable access; complete part materials and hardware are specified for the order. |
| Front and interior finish | Gray brushed-metal look on the textured fronts, against a dark top and open-shelf surfaces. Substrates, metal grades and the finish system are given in the material specification. |
| Doors and shelf storage | Enclosed end storage and open central compartments. Door operation, hinges or other hardware, internal fittings and any shelf adjustment are confirmed for the supplied cabinet. |
| Media and cable interfaces | Equipment opening dimensions, connector space, cable routing and ventilation requirements are coordinated with the actual devices. |
| Overall fit and loading | Console length, depth and height, screen-stand footprint, top and shelf load limits, and any restraint requirements need confirmed specifications with units. |
| Delivery and assembly | The order identifies assembly format, supplied fittings, packing dimensions and weight, receiving access and any site assembly or fixing responsibilities. |
| Minimum order | Made to your project quantities. Small item counts are accepted when they ship with the rest of your project list; the quotation confirms the quantity for each item. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
A television placed on the console needs its actual stand footprint and weight coordinated with the usable top and confirmed cabinet load specification. A wall-mounted screen has its own bracket and wall-support requirements, separate from the cabinet. Console position, screen height and nearby seating are coordinated for the room without assigning a universal television size.
Allow room for the equipment body, rear plugs and cable bends within the open storage. The devices also retain the ventilation space required by their manufacturers. Confirm the usable shelf openings and rear access against the actual receiver, console or other media device. Cable routes should remain accessible for connection and servicing.
The complete cabinet footprint must fit the wall area, floor position and normal room circulation. Skirting, outlets and any projecting plugs affect how close the console can sit to the wall. Leave operating space for the ordered end doors and access to nearby furniture. Receiving arrangements use the actual assembled or packed dimensions, while any restraint, floor protection or site fixing is matched to the supplied cabinet.
Our quotation identifies the individual gray textured-front console, its central open storage and the quantity required. Room references distinguish repeated cabinets and their equipment needs. Televisions, audio components and other electronics are separate items unless explicitly included in the order. A room package can list those items alongside the console without treating them as part of the cabinet itself.
The cabinet specification identifies materials for the fronts, body, top and shelves, together with the gray and dark finish references. Door hardware, internal fittings and any required shelf adjustment are stated with the selected storage arrangement. This defines the purchased construction more precisely than a general metal-look description.
Overall cabinet and compartment dimensions are recorded with units. The order also identifies top and shelf loading requirements, the actual screen stand, equipment ventilation and cable-access needs. We confirm any additional openings, restraint parts or floor-contact fittings with their responsibilities.
Packing protects the textured fronts, long edges and open shelf structure. The quote states whether the cabinet arrives assembled or in parts, which fittings come with it and what local assembly involves. Packed dimensions and weight, receiving route and destination define the delivery, and price, availability and dispatch are confirmed for the ordered quantity and construction. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The television must match the usable top, stand footprint and confirmed top-load specification. Screen diagonal alone is not enough. Provide the television weight and stand dimensions, along with the required console dimensions in stated units. A wall-mounted screen and bracket are a separate installation.
Gray brushed metal describes the look of the finish. The order names the front, body, top and shelf materials one by one, with any required metal grade or finish system.
Textured closed fronts sit at the ends, with open shelving in the center. Door operation, internal fittings, compartment dimensions and any shelf adjustment are specified for the version you order, so a particular hinge system, sliding action or adjustable shelf is confirmed in writing.
Yes. The cable opening routes wires to your wall outlets, and we can add a built-in power strip and ventilation cut-outs for media equipment. Tell us which devices go inside and we size the openings for them.
Dust with a soft dry microfiber cloth. Remove smudges with a mild soapy damp cloth and dry immediately. Avoid harsh cleaners, sharp objects and excessive moisture. Choose any other cleaner or polish to suit the finish system named on your order.
Include the Gray cabinet, quantity and room references, actual part materials and finish, door and shelf hardware, and unit-bearing overall and compartment dimensions. Add required equipment loads, cable and ventilation interfaces, assembly format and any specified fixing or protective parts. Packed dimensions, weight, receiving access and destination define delivery; screens and electronics remain separate line items.
Low Media Console with Synthetic-Leather Panels and Open Niches
Elm Veneer TV Console with Gunmetal Drawer Fronts
Mixed-Finish TV Console with Acid-Etched Glass Fronts
Custom Media Wall with Side Towers & Bridge Cabinets