JT169 thin-rib grille
The 15 mm JT169 grille has slender, flat-topped rectangular ridges with recessed valleys. Its listed overall width is 169 mm, with a 3000 mm standard length. The face rhythm is finer than a broad high-rib wall panel, while the complete outside envelope governs junctions with other materials.
The manufacturer lists wood-plastic composites as the body material, with a laminated surface, hot and cold pressing, and side slotting. The black sample shows the profile body and face together. Internal wall thickness and the side-joint engagement are resolved through the actual profile sample.
JT169 is also used for an 18 mm small-grille panel with raised hollow box-like ribs. The 15 mm thin-rib section is a separate product. The order identifies the thickness and face geometry as well as the JT169 name, preventing a finish choice from changing the section.
The selected black laminate follows the narrow ribs and recessed face. The accepted face reference and sheen determine whether the finished wall reads matte, textured or more reflective. Panel and trim references are kept together in the finish schedule.
Wood-look is an alternative surface direction for the thin-rib grille, with the actual pattern and tone selected from the accepted face sample. It remains a laminated WPC body. A wood-look name does not specify a natural wood species or convert the panel into solid timber.
Narrow ribs can make an unfinished cut edge conspicuous. The panel layout identifies exposed ends, outside returns and material transitions, with the trim or closure finish recorded alongside the face reference. Joint samples establish the finished appearance at those junctions.
| Model / material | JT169 thin-rib grille, 15 mm version; Wood-Plastic Composites with laminated face. |
|---|---|
| Laminated face | JT169 thin-rib grille, 169 × 15 × 3000 mm, selected black laminated face; exact face reference and sheen by sample. |
| Overall dimensions | 169 mm overall width × 15 mm overall thickness × 3000 mm standard length. Net cover by accepted joined sample. |
| Face / edge process | Slender rectangular ridges and recessed valleys; lamination, hot and cold pressing, side slotting. Separate from JT169 18 mm small grille. |
| Setout / cuts | Run direction, first and last panel, end joints, corners and opening cuts follow the wall elevation. |
| Support / finish | Actual laminate reference, sheen and trim finish by sample; backing, fixing and movement allowance by wall conditions. |
| Supply | Panels and accepted face; trim, cut pieces, samples, backing, fixing materials, packing, freight and installation, each listed. |
| Minimum order | Supplied in full packing units from one production batch, rounded up from your area. Small lots can ship with the rest of your project list in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The 169 mm dimension is the overall panel width. Installed pitch follows the accepted side engagement. A wall elevation positions the first and last panels so a narrow strip or interrupted rib is resolved deliberately at corners, door casings and wall ends.
Panels are listed at 3000 mm standard length. Finished cuts and joints between lengths follow the wall height and run direction. Butt joints receive their own support and alignment detail, with exposed ends finished according to the edge schedule.
Backing, fixing method, movement allowance and any required removal access are selected for the actual wall. Shelves, signage and mounted equipment use suitable support behind or through the decorative facing.
The panel line specifies JT169 thin rib, 15 mm, the chosen laminate reference and quantities by finished length. A quotation for the 18 mm small grille is a different section offer. Mixed colors remain separate finish lines within the same thin-rib model.
Perimeter trims, corner pieces, exposed ends and opening cuts are counted from the wall elevation. The quote distinguishes full panels from cut pieces and lists the matching edge parts. These quantities can change even when the total wall area stays the same.
Agreed backing and fixing materials are named as their own lines next to the panel body. Wall leveling, service coordination and installation labor follow the site conditions, and the material price carries no default adhesive rate or batten spacing.
The order retains the face and joint samples, panel labels and protected rib edges. Carton counts, packed dimensions and actual shipment weight are confirmed for the order. MOQ, timing and freight depend on the profile, length mix and destination. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The selected product is the 15 mm thin-rib section, with slender rectangular ridges over a recessed connecting face. The 18 mm small grille has a different raised hollow-rib geometry. The order carries the thickness and section description as well as the JT169 name.
It is listed at 169 mm overall width, 15 mm overall thickness and 3000 mm standard length. The installed pitch is established by the joined profile sample. Finished cut lengths and quantities follow the actual wall layout.
The final face reference and sheen are selected by sample. Black names the appearance direction. The same accepted reference is carried into the panel and trim schedule.
Yes, the appearance changes while the selected 169 × 15 mm thin-rib profile remains the same. The accepted laminate pattern, tone and sheen identify the finish. It remains a WPC body with a laminated decorative face.
The elevation shows the last rib position, cut width, opening edges and any exposed ends. The quote schedules the required trims or closures and supporting details. A service plate or mounted item must also have suitable backing and access.
No. Installation is included only when the quote names it. Backing, fixing materials, local preparation, cutting responsibility and labor are listed individually.
GP-JT159BYGS WPC Wall Panels with Rounded Ribs
JT159 Mixed-Rib WPC Wall Panels, 14 mm
Indoor Fluted WPC Wall Panels
GP-KJ195HC Bamboo-Fiber Wall Panels with Broad Ribs