Pleated Dining Chair with Upholstered Rear Legs
Narrow vertical pleats follow the inside of the curved back. The back wraps around the seated position while leaving an open gap above the separate seat cushion. This division gives the chair a lighter side profile than a continuous upholstered seat-and-back shell.
Pale upholstery continues down the rear supports, linking the back and rear-leg appearance. Small gold-tone caps finish the upper exposed ends. The cover reference and seam layout are carried through these surfaces as part of the complete chair.
Glossy black solid-wood front legs contrast with the covered rear supports. Their connected upper profile sits beneath the padded seat. We confirm the wood species, joints and floor-contact fittings with the actual assembly, while the selected appearance retains the black lacquer finish.
Faux leather is one cover choice for this pleated chair. The selected appearance uses a pale cream surface across the seat, curved back and rear-leg covering. The accepted material reference identifies the color, texture and finish for those upholstered parts.
Leather is also available for the same chair configuration. Its reference establishes the cover grade, color and surface finish while retaining the pleated back and contrasting leg arrangement. Seat seams, back pleats and rear-leg covering are coordinated as one upholstery package.
The front legs use glossy black lacquer, with champagne-gold accents at the upper ends and feet. Coordinate both finish references with the pale upholstery. The order records the leg material and finish apart from the cover selection so a change in upholstery preserves the chosen support arrangement.
| Configuration | Pleated-back dining chair with contrasting front and rear legs |
|---|---|
| Upholstery choice | Cream faux leather seat, pleated back and covered rear legs with glossy black solid-wood front legs and champagne-gold accents; actual cover reference selected for the order. |
| Front legs | Solid wood with glossy black lacquer finish |
| Selected seat height | 460 mm above floor; adopted project planning basis |
| Selected overall envelope | 560 W × 590 D × 800 H mm; chosen project dimensions, confirmed on the drawing |
| Rear supports & accents | Upholstered rear legs; champagne-gold accent details |
| Upholstery | Faux leather or leather; accepted cover, padding and seam specifications recorded for the order |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The adopted project layout uses a 560 mm overall width, 590 mm depth and 800 mm overall height, with a 460 mm seat. The final chair drawing establishes the supplied geometry.
The selected 460 mm seat level is coordinated with the dining table and its lowest underside rail. Compare the usable space above the seat and the actual curved back profile with the table position. The outside chair depth is separate from the usable seat depth.
Use the full 560 mm width when laying out repeated chairs along a table. The rear supports and curved back move with the chair as it pulls away from the tabletop. The room plan includes occupied chairs and circulation beyond the furniture footprint.
The chair item includes the padded seat, pleated back, covered rear supports, black wood front legs and gold-tone details. Its selected project envelope stays with the complete assembly. Dining tables and other furnishings are other products.
The cover reference, pleating, seams, lacquer finish and gold-tone details form the material package. Specify any required upholstery performance with the actual selected cover. Our quotation identifies the supplied padding and cover instead of relying on a color name alone.
Group the chair quantities by room, cover and leg-finish reference. The selected configuration can repeat across dining areas while retaining packing marks for each destination. Spare chairs or spare material are listed as their own lines when part of the agreed order.
Protective packing covers the pleated back, lacquered front legs, upholstered rear supports and small metal details. Actual packed dimensions and any assembly work are recorded in the delivery plan. Receiving access and room allocation follow the project schedule. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The selected arrangement combines upholstered rear legs with glossy black solid-wood front legs. The rear covering continues the pale back appearance, while the black front supports remain exposed. Both are part of the complete chair configuration.
Both cover types are available for this chair. The selected material reference identifies which one is supplied, together with its color and surface finish.
The selected project basis is 560 mm wide, 590 mm deep and 800 mm high, with a 460 mm seat. Those planning dimensions are confirmed on the final fabrication drawing, which defines the supplied chair geometry.
Vertical pleats run across the curved back. The selected seat has a separate smooth upholstered surface and its own finished edge. The accepted seam and pleat layout identifies the treatment of each upholstered component.
Compare the selected seat height, full chair width and curved back with the actual table and apron. Include the chair’s pull-back area and occupied circulation in the room plan.
List chair quantity, cover type and reference, leg finishes, selected dimensions and delivery location. Include any upholstery performance requirement and desired room marks. Our quote identifies the chair assembly, packing and agreed assembly work.
Saddle-Covered Bar Stool with an Ash-Wood Frame
Brown Upholstered Dining Chair with a Black Metal Frame
Wood Armchair with a Wrapped Saddle-Microfiber Seat
Black Fixed Bar Stool with Square Stainless Steel Base