White Coated-Steel Body
The selected cabinet is white coated steel with a 600 W × 650 D × 850 H mm envelope. The front arrangement includes one detergent drawer, selector dial and display.
Ventless All-in-One Washer-Dryer Combo
The selected combination places washing and drying functions in one cabinet and one front-loading drum. It is one appliance, taking the place of a stacked washer and dryer.
The selected drying system condenses moisture using water and discharges it through the drain. It requests no external exhaust duct, while still requiring coordinated water, drainage, electrical supply and appliance clearances.
The default order requirement is 10 kg washing and 6 kg drying; the alternative is 8 kg washing and 5 kg drying. These are the requested wash and dry load targets.

The selected cabinet is white coated steel with a 600 W × 650 D × 850 H mm envelope. The front arrangement includes one detergent drawer, selector dial and display.
The selected drum material is stainless steel behind a round front glass door. The final ordered model defines the actual drum volume, door aperture and usable load guidance.
The selected single-door layout keeps both functions at the same loading position. Any pedestal, stacking accessory or separate tumble dryer is outside this appliance requirement.
| Selected appliance envelope | 600 W × 650 D × 850 H mm |
|---|---|
| Requested wash/dry load | Requested 10 kg wash / 6 kg dry |
| Alternative requested load | 8 kg wash / 5 kg dry |
| Selected drying system | Water-cooled condensing; no external exhaust duct |
| Selected body and drum | White coated-steel body; stainless steel drum |
| Selected controls | Detergent drawer, selector dial and front display |
| Requested electrical supply | 220–240 V · 50 Hz · single-phase |
| Utility and rating boundary | Water inlet and drain required; rated loads and cycle data supplied for the final model |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
The selected drying target is lower than the washing target. A full requested 10 kg wash load exceeds the 6 kg drying target by 4 kg; load planning must follow the final model’s fabric and combined-cycle guidance.
The selected water-cooled condensing system requires water during drying as well as washing. Keep both inlet and drain arrangements coordinated with the matched model’s connection requirements.
The 650 mm depth is a selected body-envelope target. Add the final model’s hose, connection, ventilation and door-operation allowances. The requested supply is 220–240 V, 50 Hz single-phase.
Quote one single-body washer-dryer against the selected envelope and requested 10/6 kg or 8/5 kg load pair. Do not combine a separate washer and dryer into this line item.
Identify water-cooled condensing drying and the required electrical version. State included inlet/drain fittings and any connection accessories requested.
List required rated wash/dry capacities, program information, installation data and project-required reports. Cycle time, water use and energy performance must be provided for the final model.
State quantities, protection, transport constraints and destination. Pedestals, site plumbing and electrical work are separate unless individually listed.
It is a selected all-in-one appliance with one front-loading drum for both functions. A stacked pair, second cabinet or separate tumble dryer is not included.
The default target is 10 kg wash and 6 kg dry; the alternative is 8 kg wash and 5 kg dry. The final model identifies its rated loads and the applicable fabric and program data.
The drying target is lower. A requested 10 kg wash load is 4 kg above the 6 kg drying target. The actual model’s combined-cycle load and fabric guidance govern any uninterrupted wash/dry program.
No. The selected water-cooled condensing design uses water for drying and discharges condensate through the drain. It avoids an external exhaust duct but still needs the model’s utility and clearance provisions.
The body-envelope target is 600 W × 650 D × 850 H mm. Hose bends, connections, ventilation and the open door require additional model-specific space.
Match the wash/dry load pair, condensing system, electrical version and included fittings. Compare the final models’ rated capacities, programs, cycle data and installation requirements with the same project conditions.
