Oak-Veneer Open Shelving
Natural oak veneer covers the open niche and shelf edges, giving the towel compartments a different finish from the closed fronts. Grain direction is allocated across the open sides, shelf faces and adjoining panels.
Linen tower with open towel shelves
Two shelves divide the middle 1000 mm zone into three open compartments, so folded towels are in view and within reach without opening the upper or lower cupboards. The shelves are 350 mm deep with an 864 mm nominal clear span between the 18 mm case sides.
An 800 mm lower zone and 400 mm upper cupboard bracket the open towel shelves. Each closed zone uses paired hinged doors. The base can hold spare bathroom supplies or linen baskets, while the upper cupboard keeps less frequently used items behind doors.
The tower stands on a recessed plinth. The selected build uses 18 mm plywood cases and shelves with a supported 6 mm back. Suitable restraint to the wall is separate from the thin back panel.

Natural oak veneer covers the open niche and shelf edges, giving the towel compartments a different finish from the closed fronts. Grain direction is allocated across the open sides, shelf faces and adjoining panels.
Matte warm-white lacquer is scheduled for the upper and lower doors, with matching exposed finishing pieces. The small upper doors open independently of the lower cupboard, so access does not require one full-height leaf beside the bathroom circulation route.
The closed cupboards use the scheduled interior finish and finished edges. The tower is intended for a dry storage position, outside direct shower spray and standing water.
| Storage layout | 800 mm lower closed zone +1000 mm open middle zone with two shelves +400 mm upper closed zone. |
|---|---|
| Door and open-shelf finish | Warm-white lacquer upper/lower doors with oak-veneer open towel shelves and niche |
| Nominal tower size | 900 W ×400 D ×2200 H mm before additional room-fit fillers; floor-bearing tower. |
| Selected cabinet build | 18 mm plywood cases and shelves; supported 6 mm back; ordinary concealed door hinges and selected pulls. |
| Open towel shelves | Two 350 mm-deep shelves; 864 mm nominal clear span between 18 mm case sides. Three open towel compartments. |
| Closed storage access | Paired hinged doors at the upper cupboard and lower cupboard; separate opening paths. |
| Bathroom placement | Dry-zone linen storage outside direct shower spray or standing water. Wall restraint and installation matched to the site. |
| Minimum order | Made to your project quantities. Small item counts are accepted when they ship with the rest of your project list; the quotation confirms the quantity for each item. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
The open shelves give 350 mm of usable depth; the 400 mm outside cabinet depth includes the enclosure. Folded towel sizes and any loose basket decide the fit, and dividers can be added within the 864 mm span as a revised shelf layout.
The 900 mm tower has paired doors at its top and base. Their opening paths need space beside the bathroom door, basin, towel warmer and any adjacent wall return. Handles and room-fit fillers are included in that clearance layout.
The 2200 mm tower needs a level bearing surface and suitable restraint for the actual wall. Skirting, wall variation and ceiling access affect the finishing panels and installation. Additional scribe fillers are outside the nominal 900 mm cabinet width.
The selected package includes one tower, two open middle shelves, upper and lower hinged cupboards and its recessed plinth. Extra shelves or compartment dividers change the internal layout and edge finishing.
The order lists the oak-veneer open niche apart from the warm-white closed fronts, and exposed ends, fillers, shelf edges and plinth returns follow that finish allocation. Another veneer or door material is a material change with its own reference.
Concealed hinges and pulls complete the cupboard fronts. Removable towel baskets and internal organizers are extra lines with their actual sizes, and the baskets shown are one way to use the shelves.
Packing and freight are quoted for the destination and assembly format. Local wall preparation, leveling, restraint and final fitting have separate responsibilities. The tower does not include plumbing, heating or electrical work. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
It is a dedicated towel and linen cabinet: the lower cupboard is plain storage, and the tower needs no water connection.
The selected middle zone has two shelves forming three open compartments. Each shelf is 350 mm deep with an 864 mm nominal clear span. Folded towels and any loose baskets need to suit those usable dimensions.
Yes. The upper and lower cupboards each have paired hinged doors. Opening the lower cupboard does not open a full-height door across the towel niche.
It belongs in a dry storage position away from direct shower spray and standing water.
Baskets are separate accessories. Their actual outside dimensions must fit the 350 mm shelf depth and chosen compartment width. If dividers or extra shelves are required, they are added to the cabinet schedule.
The order uses the wall width and height, skirting and nearby fixture positions. Installation needs a level floor and suitable wall restraint. Additional fillers accommodate the room outside the nominal 900 mm case width.
