Matte Black Aluminum
The default powder-coat finish is matte black across the frame and slats. Match the color and sheen on a coated profile, including slat ends and the edge where the frame meets the running gear.
Manual Aluminum Sliding Driveway Gate
Manual Aluminum Sliding Driveway Gate
- Gate type
- Single manual bottom-rolling aluminum driveway gate
- Configuration
- Matte black aluminum · 4200 × 1600 mm leaf
- Selected leaf
- 4200 W × 1600 H mm; 100 mm closed overlap each side
Bottom-Rolling Aluminum Driveway Gate Construction
Horizontal Slats in a Rectangular Frame
The selected leaf uses horizontal aluminum slats within an 80 × 40 × 3 mm perimeter frame. The slat profiles are 100 × 20 × 1.5 mm. Keep their sections, connection details and end closures together on the fabrication schedule.
Two Bottom Wheels and a Ground Track
Two V-groove wheels carry the selected manual leaf along a matching ground track. Upper guide rollers control the leaf near the posts; positive stops and retention details belong to the same operating assembly.
Manual Gate Hardware
A pull, latch and guide arrangement complete the manual gate. The selected package has no motor or remote control. A future operator requires a separate assessment of the leaf, running gear, travel limits and safety devices.
Sliding Gate Powder-Coat Finishes
Warm White Powder Coat
Warm white retains the same selected leaf and hardware arrangement. Keep the coating reference with adjoining fence panels and posts so different extrusion faces do not receive unrelated shades of white.
Bronze-Tone Powder Coat
Bronze tone is a coating color on aluminum. The requested extrusion grade and temper remain 6063-T6.
Selected Sliding Gate Dimensions and Components
| Gate type | Single manual bottom-rolling aluminum driveway gate |
|---|---|
| Selected finish | Matte black aluminum · 4200 × 1600 mm leaf |
| Selected clear opening | 4000 mm between opening lines |
| Selected leaf | 4200 W × 1600 H mm; 100 mm closed overlap each side |
| Selected frame | 80 × 40 × 3 mm aluminum; 6063-T6 requested |
| Selected slats | 100 × 20 × 1.5 mm aluminum profiles |
| Operating components | 2 V-groove wheels, matching track, upper guides, pull, latch and stops |
| Project interfaces | Runback, wind design, foundations, anchors, retention and installation, each coordinated for the site |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
Driveway Opening, Runback and Ground Track
4000 mm Clear Opening and 4200 mm Leaf
The selected clear driveway opening is 4000 mm. A 4200 mm leaf provides a total 200 mm overlap in the closed elevation, shown as 100 mm at each side of the opening. Keep clear passage and leaf width as separate dimensions.
Reserve the Full Sliding Runback
The gate needs clear space beside the opening for the complete moving leaf and its stops. Show the open and closed positions, guide posts, latch post and any pedestrian route on the site plan; the 4000 mm passage is not the runback length.
Track, Drainage and Foundations
Set the ground-track route against finished driveway levels and drainage. The supporting concrete, anchors, roller guidance and wind loads need a project design.
Sliding Gate Leaf, Hardware and Site Work
Gate Leaf and Coating
List leaf width, leaf height, frame and slat sections, alloy requirement and finish reference. The selected leaf is 4200 mm wide × 1600 mm high, separate from the height of any track or foundation.
Running and Closing Hardware
Count the two wheels, track length, guide assemblies, pull, latch and end stops. Keep retention components with the operating hardware so a quotation for a bare leaf is not compared with a complete manual gate.
Posts and Civil Work
Identify included guide or latch posts and their base connections individually. Survey, foundations, drainage, driveway work and installation each go on their own quote line, with the actual site responsibilities named.
Packing and Delivery Access
Protect the slat faces and exposed corners, and label hardware by gate reference. State destination access and unloading arrangements for the full-width leaf; a split transport joint changes the fabrication and finishing work.
Manual Sliding Gate Supply Schedule
- Leaf
- Opening and leaf dimensions, frame/slat sections, alloy and coating.
- Hardware
- Wheels, track, upper guides, pull, latch, stops and retention components.
- Site
- Open/closed positions, runback, posts, levels, drainage and foundations.
- Delivery
- Leaf reference, packing, access and unloading; automation and site work listed on their own.
Aluminum Sliding Driveway Gate Questions
Is the 4000 mm dimension the gate leaf width?
It is the clear driveway opening. The selected leaf is 4200 mm wide, with 100 mm closed overlap at each side. Keep the opening, leaf width and total travel on the gate elevation.
Does the gate include an electric motor?
The selected assembly is manually operated. A motor, controller, power supply and safety devices form a separate automation package matched to the final gate and site.
How does the gate move?
Two V-groove wheels run on a matching ground track while upper guides control the leaf. Stops, retention and latch components must be scheduled with that assembly.
How much side space is needed?
Reserve space for the full moving leaf and its operating hardware beyond the driveway opening. The exact runback depends on the open position, stops, posts and site obstructions; show it on the plan as its own dimension, beyond the clear opening.
Are these profile sizes a wind-load rating?
No. The frame and slat sizes are selected procurement requirements. The leaf, guides, posts, track, fixings and foundations need to be designed together for the project conditions.
Can the gate match the slat fence?
Use the same approved coating reference and coordinate the slat pattern on the gate and fixed fence elevations. Keep gate operating gaps, posts and hardware separate from fixed-panel components.
More Fences & Gates
Welded-Mesh Steel Pedestrian Garden Gates
Horizontal Aluminum Slat Fence Panel
Custom Steel Double-Swing Driveway Gates
Stone-Filled Welded-Wire Gabion Fence BasketsRequest a Sliding Driveway Gate Quote
Manual Aluminum Sliding Driveway GateMatte black