600 × 300 mm Rectangular Slab
The standard rectangle has 0.18 m² of net stone face, and its two-to-one proportion suits a regular linear layout, with the 5 mm joint added to the repeating paving module.
Flamed Gray Granite Paving Slabs with Sawn Edges
Flamed Gray Granite Paving Slabs with Sawn Edges
- Selected stone
- Natural gray granite with granular mineral appearance
- Face format and stone thickness
- 600 L × 300 W × 30 T mm ·flamed gray granite
- Selected top finish
- Flamed
Natural Gray Granite, Flamed Tops and Sawn Edges
Natural Gray Granular Stone
The paving is natural gray granite with a crystalline grain. Color and mineral distribution vary between stones, so the approved range is set from a group of stones, and a single small face or printed chip is only a starting point.
Flamed Top with Sawn Edges
The selected top is flamed and the edges are sawn straight for a regular paving layout. These are finish and edge requirements.
30 mm Selected Slab Thickness
All three selected face formats use 30 mm nominal thickness. The supporting base, bedding and expected traffic are separate design inputs.
Three Granite Paving Slab Formats
300 × 300 mm Square Slab
The smaller square has 0.09 m² of net stone face at the same 30 mm thickness. It changes the joint frequency and cut-piece schedule without introducing a different stone color or finish.
600 × 600 mm Square Slab
The larger square has 0.36 m² of net stone face. Layout, handling, bedding contact and perimeter cuts need to follow its larger format; the selected material and flamed top remain the same.
Selected Granite Paving Slab Specification
| Selected stone | Natural gray granite with granular mineral appearance |
|---|---|
| Face-format configuration | 600 L × 300 W × 30 T mm ·flamed gray granite |
| Selected slab thickness | 30 mm nominal |
| Selected top finish | Flamed |
| Selected edges | Sawn straight; special exposed-edge treatment scheduled where required |
| Selected joint | 5 mm; installed module adds joint allocation to stone face |
| Net face areas | 600× 300:0.18 m²;300× 300:0.09 m²;600× 600:0.36 m², excluding joints/waste |
| Project boundary | Bedding, drainage, traffic design, edge restraints and required stone test documents specified for the project |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
Paving Modules, Bedding, Drainage and Edge Restraints
Tile Face and Installed Module
With the selected 5 mm joints, the repeating modules are 605 × 305, 305 × 305 and 605 × 605 mm for the three formats. These module dimensions include a joint allocation and are separate from the net stone faces.
Bedding, Falls and Drainage
Coordinate the slab layout with the actual supporting base, bedding system, falls and outlets.
Edges, Cuts and Natural Variation
Show full slabs, cut pieces, edge restraints and movement joints on the paving plan. Keep approved color/texture range references with the stone order, and separate any special exposed-edge treatment from the standard sawn edges.
Granite Paving Quote and Stone Quantities
Face Format and Net Stone Area
Quote slab dimensions, 30 mm thickness and full-piece counts alongside net stone face area, with joint area and waste allowance stated as their own figures.
Stone Range and Surface Finish
List the approved gray granite range, flamed top, sawn edges and any different edge finish. Quarry identity or performance classifications come with supporting documents when the project needs them.
Cut Pieces and Installation Materials
Count border cuts, steps, drain cuts and special pieces individually. Bedding, grout or joint filler, edge restraints, waterproofing and site installation are added only when expressly included.
Pallet References and Site Handling
Label bundles by format, stone range and paving-zone reference. Packing, handling equipment, destination access and unloading responsibilities need to match the 30 mm stone pieces and their actual packaged weights.
Granite Paving Slab Order Schedule
- Stone pieces
- Face dimensions, 30 mm thickness, piece counts, net stone area and cut references.
- Material and finish
- Accepted gray granite range, flamed top, sawn edges and special edge work.
- Project interfaces
- Paving modules, joints, bedding, drainage, traffic requirements and perimeter details.
- Delivery boundary
- Pallet labels, protection, destination and unloading; site materials and work listed on their own.
Granite Paving Slab Procurement Questions
What do the slab dimensions describe?
They describe the selected stone face and 30 mm nominal thickness. The three face formats are 600 × 300, 300 × 300 and 600 × 600 mm; the selected 5 mm joints add to the repeating installed module.
How much net stone face does one slab provide?
Net face areas are 0.18 m² for 600 × 300 mm, 0.09 m² for 300 × 300 mm and 0.36 m² for 600 × 600 mm, before joints, cuts and waste are allowed for.
Is flamed granite slip-resistant enough for outdoor paving?
Flaming leaves a textured, non-polished surface that is widely used for terraces, pool decks and steps. When your project requires a slip value, we supply the test result for the selected granite and finish.
Can 30 mm granite slabs carry vehicles?
Traffic, bedding contact, base construction, span and installation need to be designed together for the actual paving use.
Will every gray granite slab have the same color?
Natural granite varies in grain and shade, so the order keeps an approved material range and layout references, and each slab falls within that range.
What is included in the paving quote?
List full slabs, cut pieces, finish requirements and quantities apart from bedding, joint materials, drainage, edge restraints and installation, then add the paving layout, site use, destination and any material test documents required.
More Outdoor Pavers
Textured Porcelain Patio Pavers, 12–20 mm
Interlocking Porcelain Deck Tiles on Drainage Grids
Porcelain Terrace Step Tread and Riser Sets
Pedestal-Supported Porcelain Terrace Paver KitsGuides for specifying outdoor pavers
Request a Granite Paving Slab Quote
Flamed Gray Granite Paving Slabs with Sawn Edges600 × 300 mm slabs