Light-Gray Coated Steel
The selected dryer cabinet is light-gray coated steel. A front selector dial and display sit above the loading door.
Stackable Heat-Pump Dryer with Matching Stacking Kit
Stackable Heat-Pump Dryer with Matching Stacking Kit
- Selected dryer envelope
- 600 W × 650 D × 850 H mm
- Requested dryer load
- Requested 8 kg dry load
- Selected drying system
- Ventless heat-pump tumble dryer
Ventless Dryer and Separate Stacking Frame
Selected Heat-Pump Drying System
The selected appliance requirement is a ventless heat-pump tumble dryer. Requested dry-load options are 8, 9 and 10 kg. These are the requested dry-load targets.
600 mm-Wide Dryer Body
The selected envelope is 600 W × 650 D × 850 H mm, with a stainless steel drum, one front glass door, a condensate-tank drawer and lower filter access. The appliance is a dryer only.
Separate Frame and Retention Strap
The selected kit is a dark powder-coated steel tray frame with raised rails and a fabric retention strap. Its 600 × 600 × 40 mm target is a design starting point; the actual kit must match the appliance feet, supporting washer and retention points.
Gray Dryer Body and Dark Steel Kit
Stainless Drum and Condensate Tank
The selected stainless drum is paired with a removable condensate collection tank. A direct-drain option is separate and can be included only when provided by the final matched model.
Dark-Coated Stacking Frame
The selected kit finish is dark powder coat over steel. Frame geometry, pads, rails and strap attachment must be defined for the actual appliance pair.
Selected Heat-Pump Dryer Requirements
| Selected dryer envelope | 600 W × 650 D × 850 H mm |
|---|---|
| Requested dry load | Requested 8 kg dry load |
| Alternative requested loads | 9 kg / 10 kg procurement targets |
| Selected drying system | Ventless heat-pump tumble dryer |
| Selected body and drum | Light-gray coated steel; stainless steel drum |
| Selected condensate handling | Removable tank; direct drain only if final model supports it |
| Selected kit target | 600 × 600 × 40 mm dark steel tray frame, rails and retention strap |
| Supply and matching boundary | Requested 220–240 V · 50 Hz single-phase; exact washer/dryer/kit match required |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
Dryer Envelope, Condensate and Matched Stacking
Match Both Appliances and the Kit
Specify the actual washer and dryer models, footprints, dryer-foot positions and kit retention details together.
Keep Access and Condensate Routes Clear
Allow the dryer door, tank drawer and filter access to operate in the intended position. Coordinate tank handling or any final-model drain connection with service access and hose routing.
Add Connections to the Body Envelope
The selected 650 mm body depth does not include all installation clearances or hose and connection allowances. The requested supply is 220–240 V, 50 Hz single-phase; match the final model rating and installation instructions.
Heat-Pump Dryer and Kit Quote Items
Dryer Load and Quantity
Separate the requested 8, 9 and 10 kg load targets and appliance quantities. The final matched dryer model must state its rated capacity and required installation provisions.
Matched Stacking Kit
Quote the specific frame, pads, rails and retention components as their own line item, matched to the exact washer/dryer combination.
Condensate and Model Documents
List tank collection, any requested model-supported direct-drain accessories, installation data and required performance documents. No energy class or drying time is inferred from heat-pump selection.
Packing and Delivery
Protect the dryer and kit as individual packages with matching order references. State quantities, delivery access and destination; the supporting washer and site installation are other items.
Dryer and Matched Kit Schedule
- Dryer
- Envelope, requested dry load and quantity
- Kit
- Actual washer/dryer references, frame and retention parts
- Connections
- Condensate handling, electrical version and model documents
- Delivery
- Separate package references, protection and destination
Stackable Heat-Pump Dryer Questions
Is the supporting washer included?
No. The selected supply is the dryer and a matched stacking kit on its own line. The washer must be identified to coordinate the supporting footprint, loading and retention arrangement.
Which dryer loads are requested?
The selected procurement targets are 8, 9 and 10 kg. The final model identifies its rated capacity and the applicable program and drying data.
Will the dryer stack on my washer?
Yes, with a washer from the same manufacturer's approved range. We supply the dryer with the stacking kit for the washer model you order, so the feet, straps and retaining points line up.
What does the selected stacking kit contain?
The selected design has a dark steel tray frame, raised side rails and a fabric retention strap.
How is condensate collected?
The selected dryer has a removable collection tank.
What data is needed for a dryer and kit quote?
Include the requested dry load, electrical supply, exact supporting washer, intended position and quantities. Add door/tank/filter access, condensate route, delivery constraints and required matched-model installation documents.
More Washers & Dryers
Twin-Tub Semi-Automatic Top-Load Washing Machines
Ventless All-in-One Washer-Dryer Combo
Front-Load Washing Machine for Side-by-Side Laundry
French-Door Refrigerator with Bottom Freezer DrawerRequest a Dryer and Matching Kit Quote
Stackable Heat-Pump Dryer with Matching Stacking Kit8 kg request