Satin Stainless Exterior
The selected exterior has satin-stainless door faces, vertical upper handles and a horizontal freezer-drawer handle. It has no selected through-door water or ice dispenser.
French-Door Refrigerator with Bottom Freezer Drawer
The selected upper compartment has a pair of outward-opening doors, glass shelves, clear door bins and lower crispers. The split-door arrangement provides separate access to each side of the refrigerator front.
A single full-width freezer drawer sits below the refrigerator compartment. The selected default capacity target divides 500 L into 330 L refrigerator and 170 L freezer requirements. These are requested storage volumes.
The default selected envelope is 900 W × 700 D × 1800 H mm. The alternatives request 800 mm or 1000 mm widths with the same selected depth and height, paired with 450 L and 650 L total-capacity targets.

The selected exterior has satin-stainless door faces, vertical upper handles and a horizontal freezer-drawer handle. It has no selected through-door water or ice dispenser.
The selected refrigerator interior combines glass shelves, clear door bins and crisper drawers in a white polymer liner. Final shelf adjustability and accessory counts belong with the matched model.
The lower drawer provides the selected freezer-access arrangement. A separate ice maker, water connection or additional internal organizer is not included in the selected requirement.
| Selected default envelope | 900 W × 700 D × 1800 H mm |
|---|---|
| Selected width and requested volume | 900 mm width · requested 500 L total |
| Requested default compartment volumes | 330 L refrigerator + 170 L freezer; procurement targets |
| Selected door arrangement | Two upper refrigerator doors; one lower freezer drawer |
| Selected exterior | Satin stainless steel with matching handles |
| Selected interior | White liner, glass shelves, clear bins and crispers |
| Requested electrical supply | 220–240 V · 50 Hz · single-phase |
| Alternative width/volume targets | 800 mm / 450 L and 1000 mm / 650 L; same selected 700 D × 1800 H mm |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
The 700 mm selected closed depth is an appliance-envelope target. Installation space must also accommodate the final model’s ventilation, connections, handles and service access. Do not treat the body depth as a flush cabinet-opening depth.
Place hinge-side walls, counters and aisles against the open-door and drawer-travel dimensions of the final model.
The default requested supply is 220–240 V, 50 Hz single-phase. Compare the final model rating and transport dimensions with the site supply, doorways, elevators and appliance location.
Separate 800, 900 and 1000 mm width requirements with their requested 450, 500 and 650 L total capacities. The final model must state its rated compartment capacities.
Identify the glass shelves, clear bins and freezer-drawer arrangement. Itemize any requested ice maker, extra organizer or other accessory as an addition to the base appliance.
List required rated capacities, dimensions, electrical data and installation instructions. Cabinet alteration, ventilation construction and site electrical work are site work.
State appliance quantities, packaging and destination. Include doorway or elevator constraints and any requested delivery handling in the logistics line item.
Two upper doors serve the refrigerator compartment and one wide pull-out drawer serves the freezer below. It is a French-door bottom-freezer arrangement.
The selected widths are 800, 900 and 1000 mm. Each is paired with a selected 700 mm depth and 1800 mm height; final model dimensions and opening clearances must be matched to the site.
The requested total capacities are 450, 500 and 650 L. The 900 mm default requests a 330 L refrigerator and 170 L freezer split. The final model identifies its rated compartment volumes and the basis used to state them.
No through-door dispenser or ice maker is included in the selected requirement. If a water-connected feature is added to the final model, its connection and accessories must each be identified.
It is the selected closed appliance-envelope depth; the complete installation space is larger. Handles, ventilation, connections, door travel and service clearance follow the final matched model instructions.
Include width and capacity targets, quantity, electrical supply, appliance location and destination. Add adjacent walls or cabinets, door/drawer clearance and delivery-route limits with the required model documentation.
