18 mm Oak-Veneered Panels
The selected furniture fronts are 18 mm plywood with light-oak veneer. Default panels are each 596 W × 2000 H mm; a nominal 750 mm column uses a selected 746 mm-wide panel of the same height and thickness.
Panel-Ready Refrigerator and Freezer Column Pair
The selected refrigerator has a white polymer liner, glass shelves, clear door bins and two lower crisper drawers. It occupies its own full-height appliance body.
The separate selected freezer has a white liner and five clear-front drawers. A narrow vertical joint separates the two appliance bodies and their furniture fronts.
The default nominal pair is 600 mm refrigerator plus 600 mm freezer, totaling 1200 mm. The alternatives are 750 + 600 mm and 750 + 750 mm, totaling 1350 and 1500 mm. Selected height and depth are 2120 and 600 mm.

The selected furniture fronts are 18 mm plywood with light-oak veneer. Default panels are each 596 W × 2000 H mm; a nominal 750 mm column uses a selected 746 mm-wide panel of the same height and thickness.
The refrigerator door opens left and the freezer door right in the selected arrangement. Dark vertical handles sit near the central joint; hinge travel, panel mass and adjacent cabinetry must be coordinated with the final appliances.
A base ventilation grille is selected below each column. Grille free area and the full inlet/outlet air route must meet the final matched appliance requirements.
| Selected column arrangement | Separate refrigerator and five-drawer freezer |
|---|---|
| Selected nominal width pair | 600 + 600 mm nominal · 1200 mm total |
| Selected pair height and depth | 2120 H × 600 D mm |
| Selected default door panels | Two panels, each 596 W × 2000 H × 18 T mm |
| Selected panel material | Light-oak veneer over plywood; dark metal handles |
| Selected interior arrangement | Refrigerator shelves/bins + two crispers; freezer with five drawers |
| Requested supply and ventilation | 220–240 V · 50 Hz single-phase per column; separate base air routes |
| Alternative nominal width pairs | 750 + 600 mm / 750 + 750 mm; selected 746 mm panel on each 750 mm column |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
The 1200, 1350 and 1500 mm totals are the sums of the selected nominal column widths. They are not finished rough-opening dimensions; model clearances, panel joints and fitting provisions remain separate.
Keep the selected panel size, handle projection, mass and door swing on the cabinetry elevation. The final model’s hinge mechanism and panel fixing determine the allowable furniture front.
Coordinate the base air route, electrical connections and access for removing each appliance on its own. The requested supply is 220–240 V, 50 Hz single-phase for each column; final model ratings govern.
Quote the refrigerator and freezer as two appliances with the selected width pairing. The final matched models must state their own rated storage capacities.
Itemize oak-veneered panels, handles and any panel-fixing components as their own lines next to the appliance bodies. List each front by column and room reference.
Identify base grilles, joining or alignment components and required model installation data. Cabinet fabrication, site electrical work and ventilation construction are separate unless listed.
Keep the two appliance references, doors, handles and hardware traceable as a pair while protecting each item individually. State quantity, destination and transport-access constraints.
It is a pair of separate full-height appliances: one refrigerator column and one freezer column. Each has its own body, door and ventilation provisions.
The selected nominal pairings are 600 + 600, 750 + 600 and 750 + 750 mm. Their summed widths are 1200, 1350 and 1500 mm, before final model installation allowances.
A nominal 600 mm column uses a selected 596 W × 2000 H × 18 T mm panel. A nominal 750 mm column uses 746 W × 2000 H × 18 T mm. The material is light-oak-veneered plywood.
The refrigerator has glass shelves, door bins and two lower crispers. The separate freezer has five clear-front drawers. The final models must state their rated storage volumes.
The final models determine allowable panel dimensions and mass, hinge movement, fixing points and neighboring cabinet clearances.
Each selected column has its own base grille. The final model instructions define required free area and inlet/outlet routes; the furniture plinth must retain those routes and appliance service access.
