Textured porcelain patio surface
These are porcelain outdoor pavers with a textured stone-look surface for patios and walkways, made in porcelain to look like natural stone. The chosen series sets the face pattern, format and edge specification.
The supplied paver range spans 12–20 mm in thickness. That thickness is one layer in the completed patio build-up, alongside the chosen bedding or support system.
Perimeter cuts meet walls, planters, drains and the edge of the paving, and a cut face can look different from the decorative top, so exposed edges are marked before the layout is priced. Border pieces, step transitions and coping get their own finished details.
The selected surface reference establishes the stone-look color, texture and pattern variation. A long directional pattern reads differently when pavers turn at a border or change orientation around an outdoor room. Surface texture is reviewed for the actual use; it is not a substitute for a product-specific slip test where one is required.
Paver thickness is coordinated with the base, joints and adjoining finishes, since door thresholds, drain covers and existing paving set the levels the new surface must meet. Moving from 12 mm to 20 mm adds 8 mm to the paver layer, and any bedding or support change is decided on its own.
A wall-side cut and an exposed front edge need different finishing, so the piece layout marks cut locations, narrow strips and the edge treatment at each boundary. Matching trim, coping or step pieces are confirmed where required.
| Material and application | Porcelain outdoor pavers with a textured stone-look surface for selected patio and walkway layouts; series and application identified for the order. |
|---|---|
| Paver thickness | 20 mm porcelain paver; selected format, support system and outdoor application confirmed for the order |
| Paver format | Selected length × width in mm; actual finished dimensions, edge type and joint width recorded with the product series and laying plan. |
| Surface reference | Stone-look color, face texture, pattern direction and design variation selected by the series and approved material reference. |
| Area and quantity | Area per piece (m²) = length (mm) × width (mm) ÷ 1,000,000. Net paved area, joints, perimeter cuts and spare pieces each scheduled. |
| Base and finished levels | Paver thickness plus selected bedding or support depth; substrate, drainage, thresholds and edge restraint coordinated for the installation. |
| Installation and ratings | Bonded, supported or raised installation requires documentation for the selected series and system; no declared vehicle load, pedestal compatibility, slip or freeze-thaw rating. |
| Minimum order | Supplied in full packing units from one production batch, rounded up from your area. Small lots can ship with the rest of your project list in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The format schedule uses millimeters for each paver and square meters for the paved area; piece length times width divided by 1,000,000 gives its area in m². Joint spacing and perimeter cuts are then set in the laying plan, and spare pieces are ordered as their own quantity.
The completed surface level includes the paver and its bedding or support system. Falls, drain positions and threshold details need to work together so water has an intended route away from sensitive junctions. The selected base and installation design establish those levels.
A bonded installation on a prepared base and a raised system supported at selected points impose different conditions on the paver. The actual format, thickness and product documentation must support the chosen method. Pedestals, adhesives, base layers and edge restraints are separate system selections. This range is not presented as universally compatible with every raised-paving system.
Our quotation names the series, thickness, format and quantities by area or zone, counting full pieces, cut pieces and agreed spares one by one. A larger format means fewer joint lines but changes handling, cutting and layout, and the price follows the configuration you choose.
Planter corners, walls, drain openings and angled boundaries add different cuts, and borders may need a chosen face direction or a finished edge. These items are shown in the piece schedule, so the quote shows plain flat pavers apart from cutting or special edge pieces.
The pavers form the finish-material package. Base preparation, adhesives, jointing products, pedestals, drains, edge restraints and waterproofing are separate items where applicable. The order identifies which accessories are supplied and which are provided by the installer.
The packing schedule records quantities by format, carton or pallet, with the packed weight confirmed for the shipment. Protection is especially relevant around corners and cut edges. Freight, unloading access and site storage follow the destination. Local laying, base work and removal of existing paving are separate responsibilities. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
They are porcelain outdoor pavers with a textured stone-look face. The selected series identifies the actual material, format, face treatment and edges supplied for the patio.
The supplied range spans 12–20 mm. The final thickness is selected with the format, base or support system and adjoining finished levels.
The textured surface is made for patios, pool surrounds and other outdoor floors. Tell us the slip rating your project needs, such as R11 or a DCOF value, and we confirm whether a matching test report is available for the series and thickness you order.
Use the piece length and width in millimeters: length × width ÷ 1,000,000 gives m² per piece. The laying plan then allows for joints, borders and cuts, and the order records full pieces, cut pieces and spares as three quantities.
No. Only where the selected paver and complete support system are documented for that method. Format, thickness, support points and edge conditions all matter.
Our quote identifies the series, finish, format, thickness and quantities, plus scheduled cuts, edge components and spares. Packing and freight follow the destination. Base preparation, supports, adhesives, joints, drainage and local laying are separate items unless expressly included.
Pedestal-Supported Porcelain Terrace Paver Kits
Porcelain Terrace Step Tread and Riser Sets
Interlocking Porcelain Deck Tiles on Drainage Grids
Flamed Gray Granite Paving Slabs with Sawn Edges