Satin White Glaze
Satin white is the default selected face. Keep the glaze reference consistent between straight pieces and the chosen corner or end components.
Ceramic Cove Base Tile with a Concave Floor Return
Ceramic Cove Base Tile with a Concave Floor Return
- Selected body
- Glazed ceramic cove base
- Cove-base glaze finish
- Satin-white glazed ceramic
- Selected wall height
- 100 mm
Glazed Ceramic Cove and Concave Floor Return
Concave Inside Transition
The selected cove joins a vertical wall leg to a horizontal floor return through a 25 mm inside radius, with the glazed face curving inward through the floor-to-wall junction.
100 mm Wall Leg and 50 mm Projection
The selected overall wall height is 100 mm and the floor projection is 50 mm. Nominal body thickness at the flat legs is 8 mm, with the curved profile detailed as part of the same ceramic piece.
200 mm Straight Ceramic Piece
The selected straight length is 200 mm. Corners, ends and cut pieces are scheduled alongside the straight runs so the profile continues through the actual room perimeter.
Ceramic Cove Base Glaze Options
Light Gray Glaze
The light gray option retains the same selected cove section, straight length and body dimensions. Its sample reference follows the adjoining wall and floor finish.
Charcoal Glaze
The charcoal option uses the same profile and size in a darker selected glaze, with tone and sheen identified on the ceramic sample.
Selected Ceramic Cove Base Profile
| Selected body | Glazed ceramic cove base |
|---|---|
| Selected glaze finish | Satin-white glazed ceramic |
| Selected straight length | 200 mm |
| Selected wall height | 100 mm |
| Selected floor projection | 50 mm |
| Selected inside cove radius | 25 mm |
| Selected nominal flat-leg thickness | 8 mm |
| Separate matching pieces | 90° inside/outside corners, ends and cuts scheduled by location |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
Straight Runs, Corners and Floor-to-Wall Levels
Calculate Runs with the Actual Joints
Five 200 mm pieces total 1000 mm of ceramic length before joints. The order count also needs the selected joint layout, ends, corners and any short cuts.
Separate Inside and Outside Corners
List 90° inside corners, outside corners and end pieces on their own lines. Each one is shaped to the selected cove face and floor return, so they are counted next to the straight tiles as distinct pieces.
Coordinate Floor and Wall Build-Up
The 100 mm wall height and 50 mm floor return sit within the complete floor/wall detail. Adhesive, grout, joint treatment and adjoining finish levels are separate assembly requirements.
Cove Base Tile Quote and Piece Schedule
Straight Pieces and Glaze
Quote the selected cove section, 200 mm straight length, glaze and piece count. Keep the net run lengths separate from the ordered ceramic count.
Corner and End Components
Identify inside corners, outside corners and left/right end conditions by location. These pieces have their own counts in the same cove-base schedule.
Cuts and Exposed Ends
List short cut lengths and any required finished exposed ends independently from whole straight pieces. Keep their glaze and orientation with the adjoining run.
Packing and Room References
Group straight pieces, corners and ends by profile and room reference. Protective packing, destination and any installation materials ordered with the tiles belong on the order.
Ceramic Cove Base Supply Schedule
- Straight profile
- Selected section, length, glaze and straight-piece count
- Special pieces
- Inside/outside corners, ends and their location counts
- Fabrication
- Short cuts, exposed ends and required orientation
- Delivery
- Room/profile references, protection, destination and separate materials
Ceramic Cove Base Tile Questions
Is this the same profile as a ceramic bullnose?
The selected cove has a concave inside radius between its wall leg and floor return. A bullnose forms an outward rounded edge; its profile and purpose are different.
What are the selected cove dimensions?
The straight piece is 200 mm long, with a 100 mm overall wall height, 50 mm floor projection and 25 mm inside radius. Nominal body thickness at the flat legs is 8 mm.
Which glaze options are specified?
The selected options are satin white, light gray and charcoal. Each uses the same cove geometry and straight-piece length, with the glaze sample kept alongside the matching corner and end references.
How should straight-piece quantities be calculated?
Five 200 mm pieces equal 1000 mm of ceramic length before joints. Use the actual run and joint layout, then add corners, ends, short cuts and agreed spare pieces as their own counts.
Are corner pieces included in the straight-piece count?
Inside corners, outside corners and ends are separate scheduled components. Identify their type and location so they match the same cove profile and glaze.
What should be included in a cove-base quote?
Include the profile dimensions, glaze, straight run layout, joint arrangement and counts of corners, ends and cut pieces. Add room references, packing requirements and destination to the schedule.
More Floor Trim & Accessories
Flush Aluminum Stair Nosing for 10 mm Floor Finishes
Aluminum Reducer Strips for Unequal Floor Levels
Aluminum Floor Movement-Joint Profiles with a Flexible Insert
35 mm Aluminum T-Molding for Same-Level Floor TransitionsRequest a Ceramic Cove Base Quote
Ceramic Cove Base Tile with a Concave Floor ReturnSatin white