Cordless Aluminum Venetian Blinds with Tilt Wands
The selected white aluminum slats have a 25 mm face width and a nominal 0.18 mm material thickness. They form a horizontal louver field supported by ladder cords. Slat finish, edge condition and the corresponding headrail width are recorded as one blind assembly.
A matched spring-lift mechanism sits within the headrail and operates with the bottom rail. The lift package is selected for the scheduled width, drop and slat assembly, with the mechanism and its fittings retained as identifiable components.
A separate manual wand rotates the slats through the tilt mechanism and ladder supports. The wand position and accessible length are coordinated with the window and the finished blind. Lift and tilt retain distinct operating roles in the assembly schedule.
The compact selection pairs a 900 mm headrail with an 870 mm-wide slat pack. The 30 mm width difference is shared equally between the sides. It retains the 1800 mm finished drop and the same selected slat and control construction.
The default selection uses a 1200 mm headrail and a 1170 mm slat pack. This preserves a nominal 15 mm difference at each side between the rail envelope and the slat field. The white rail, slats and bottom rail form the finish package.
The wider selection uses a 1500 mm headrail with a 1470 mm slat pack and the same 1800 mm finished drop. The spring lift and supporting hardware are matched to this wider assembly, keeping the width change coordinated with the operating components.
| Blind construction | Horizontal aluminum Venetian blind with separate lift and tilt mechanisms |
|---|---|
| Headrail and slat-pack width | 900 mm white headrail · 870 mm slat pack · 1800 mm finished drop |
| Finished drop | 1800 mm · headrail top to bottom-rail lower edge |
| Selected slats | 25 mm face width × 0.18 mm nominal aluminum thickness |
| Lift mechanism | Matched enclosed cordless spring lift |
| Tilt control | Manual tilt wand with ladder supports |
| Finish package | White aluminum slats, headrail and bottom rail |
| Supply unit | One complete blind with compatible clips and selected inside-top or face-fix brackets |
Open product drawing ↗
The selected widths describe the headrail itself. Record the actual recess or face-fix opening as its own dimension and establish the mounting position and fitting clearance from that survey. The finished 1800 mm drop runs from the headrail top to the bottom-rail lower edge.
Compatible headrail clips connect to the selected inside-top or face-fix brackets. Identify the wall or ceiling substrate, fixing positions and clear mounting depth. Handles, opening sashes and adjacent trim belong on the same window section.
Locate the wand where the operator can reach it alongside the window. Provide an accessible bottom rail through the lift travel and coordinate nearby furniture with that route. The final window schedule records control side, wand length and bracket arrangement.
List each headrail width with its matching slat-pack width and the 1800 mm finished drop. The supply line includes the selected slats, headrail, bottom rail and ladder supports.
The package identifies the enclosed spring-lift mechanism, manual tilt wand and tilt fittings. Component selection follows the corresponding blind width, drop and assembled slat field.
Specify inside-top or face-fix mounting, compatible headrail clips and the substrate-specific fixing package. Bracket positions and mounting depth are recorded with the window opening and its operating hardware.
Group blind quantities by room and window reference. State requested spare clips, wand parts and slats, then identify finish references, packing labels and operating documents for the scheduled assemblies.
The headrail options are 900, 1200 and 1500 mm. Their matching slat packs are 870, 1170 and 1470 mm. Each pair has a 30 mm overall width difference, shared as 15 mm per side.
It is the assembled dimension from the top of the headrail to the lower edge of the bottom rail. The window opening, bracket position and installation clearance are recorded on the window schedule.
The enclosed cordless spring mechanism operates the lift through the bottom rail. A separate manual wand operates the tilt mechanism and ladder supports to change the slat angle.
The selected package uses compatible headrail clips with inside-top or face-fix brackets. The order identifies the mounting surface, substrate-specific fixings, clear depth and bracket positions.
Yes. The selected family keeps a 25 mm slat face, nominal 0.18 mm aluminum thickness and white finish across the three widths. The lift package and hardware are matched to the corresponding complete assembly.
Provide the room and window references, opening dimensions, headrail selection, mounting arrangement and substrate. Add control side, wand access, quantities, spare components and the requested packing labels.
Wand-Operated Vertical Blinds for Sliding Glass Doors
Custom Roller Shades for Sliding Glass Doors
Side-Gliding Cellular Shades for Sliding Glass Doors
Cordless Roman Shades with Sewn Batten Pockets