JT169 small-grille profile
JT169 small grille has a 169 mm overall width and an 18 mm overall thickness. Narrow, flat-topped rectangular ribs project from a recessed connecting face, producing repeated straight shadow lines. Hollow cells show inside the raised ribs at the cut end.
The body is listed as wood-plastic composites, with lamination, hot and cold pressing, and side slotting. A wood-look face is a surface choice on that composite profile. The order keeps the profile identification and face reference together so a color selection cannot substitute a different section.
The 18 mm small-grille model is distinct from the 15 mm JT169 grille, listed on its own page, and from the deeper high-rib families. Profile depth, hollow-rib shape and valley rhythm affect wall returns and trim selection, so the order names the thickness as well as the 169 model number.
The light wood-look selection uses the same small-grille WPC body and follows the rib direction. Its actual laminate reference, grain character and sheen are fixed by an accepted sample. Adjacent panels and corner pieces are listed under the same face selection.
The dark selection changes the laminated appearance while retaining the 169 × 18 mm profile. The accepted face sample governs color and surface texture; the material schedule preserves the 18 mm model identification. Dark and light choices are finish alternatives on this page.
Outside returns, inside corners and panel ends need a junction that works with the projecting ribs. Trim width, exposed finish and location are scheduled alongside the panel run.
| Model / material | JT169 small-grille panel, 18 mm version; Wood-Plastic Composites body with laminated face. |
|---|---|
| Laminated face | JT169 small grille, 169 × 18 × 3000 mm, with a selected light wood-look laminated face; final face code and sheen by sample. |
| Overall dimensions | 169 mm overall width × 18 mm overall thickness × 3000 mm standard length. |
| Profile / process | Narrow rectangular raised ribs with open hollow cells; laminated surface, hot and cold pressing, side slotting. |
| Setout / joints | Installed pitch by joined sample. Rib direction, end joints, corners, openings and cut lengths by elevation. |
| Wall interface | Backing and fixing selected for actual substrate and orientation. Attached loads require independent suitable support. |
| Supply | Panels, face samples, trim and cut pieces; backing, fixing materials, packing, freight and installation, each itemized. |
| Minimum order | Supplied in full packing units from one production batch, rounded up from your area. Small lots can ship with the rest of your project list in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The listed width is 169 mm overall. Net cover follows the actual side engagement and a joined sample. Setout starts from the accepted panel pitch, with the first and last rib positions coordinated at corners, doors and other exposed terminations.
The standard length is 3000 mm. Vertical or horizontal appearance is selected with the support and end-joint layout; a change in direction alters where cut ends and trims appear. Cut lengths, butt-joint support and openings are carried on the wall elevation.
The panel is wall facing, with the substrate and fixing arrangement selected for its orientation and site conditions. Required backing, battens, adhesive or mechanical fixings are identified in the project schedule. Equipment and other attached loads have a separate structural fixing path.
The panel line identifies JT169 small grille, 18 mm thickness, the finished cut lengths and piece count. Laminate reference and finish sample belong to that line. The 15 mm JT169 grille is not an interchangeable replacement within a color quotation.
Return details, exposed ends and service openings create their own trim and cutting quantities. The quote separates full panels from cut pieces and lists matching edge parts. Joint alignment and the rib position at each edge belong to the final setout.
Wall preparation, support materials and fixing products are priced as named line items. The actual backing and access conditions determine their arrangement.
The accepted face and joint samples, panel labels and protected rib ends support a consistent shipment. Carton quantity and actual packed weight are confirmed for the chosen profile and cut schedule. Freight, MOQ and production timing follow the project order. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
This page covers the 18 mm small-grille panel, 169 mm overall wide and 3000 mm in standard length. It has narrow rectangular raised ribs with open hollow cells. The 15 mm JT169 grille, listed on its own page, has a different section, so the thickness stays on every order line.
The 169 mm dimension is overall width. A joined sample establishes net cover after the side edges engage. The wall setout and final quantity use that accepted pitch, with corner positions, cut panels and spares listed individually.
The laminated face changes; the 18 mm small-grille WPC profile stays the same. The accepted laminate reference and sheen are recorded for panels and exposed trims.
The elevation shows the rib direction, first and last panel positions, cut ends and corner detail. Exposed ends and returns receive their own agreed trim or closure. A butt joint between lengths has its own backing and alignment detail.
Those are project selections tied to the substrate, orientation and accepted fixing detail. The quotation names the backing and fixing materials actually included.
This selection supplies decorative WPC wall facing. An acoustic or fire requirement needs an identified tested assembly, including its substrate and fixing arrangement. The project specification and quotation must name that assembly and the evidence required before a rated substitution is accepted.
GP-JT159BYGS WPC Wall Panels with Rounded Ribs
GP-KJ195HC Bamboo-Fiber Wall Panels with Broad Ribs
GP-JT170HC WPC Wall Panels with Raised Ribs
Wood-Veneer MDF Slat Panels with PET Felt Backing