Leather Dining Bench with an Ash Frame and Metal Base
A pale leather seat runs between two dark projecting ends. The open back allows the bench to sit along a dining table without a chair back above the tabletop. The upholstery and its edges show from both long sides.
The dark ends extend beyond the leather seat and turn slightly upward at their outer edges. They give the bench a defined end treatment. Overall width includes those projections as well as the upholstered seating surface.
Four dark legs and low cross-stretchers leave open space beneath the seat. Ash components and the stainless steel base frame form the support package. Their material allocation and connections stay on the bench component drawing.
The seat uses a pale saddle-leather reference. Color, texture, edge finishing and the upholstery junction with the dark ends are recorded together. The selected leather surface remains distinct from the bench wood and metal finishes.
Ash components carry a brushed finish and a dark appearance. Their grain and end treatment form part of the furniture package, including the surfaces seen when the bench is viewed from the side or behind the table.
The stainless steel base frame has a gray-titanium finish. Its tone coordinates with the dark wood while keeping its own material description. The bench drawing establishes the wood-to-metal junctions.
| Bench configuration | Backless leather dining bench with projecting end details, four legs and low stretchers |
|---|---|
| Material package | Pale saddle-leather seat with brushed-finish ash components and a stainless steel base frame in gray-titanium finish; 1580 W × 450 D × 420 H mm overall. |
| Seat material | Pale saddle leather; selected leather reference and edge treatment |
| Overall size | 1580 W × 450 D × 420 H mm |
| Wood components | Ash with a brushed finish; dark appearance |
| Base frame | Stainless steel with a gray-titanium finish |
| Table interface | Overall width includes projecting ends; usable seating length and table-leg clearances follow the furniture layout |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The bench measures 1580 mm across its complete outside body. The projecting dark ends are included in that width. Table-leg spacing and the intended tuck-in position therefore use the overall bench width, which exceeds the leather-seat length.
Overall depth is 450 mm and overall height is 420 mm. The table height and underside remain separate furniture dimensions. The layout also reserves room to move the bench back and sit down along either end.
A bench has one continuous seating area, with no fixed individual chair positions. Table legs, corner supports and the placement of diners establish the seating arrangement.
We quote it as a single furniture line covering the backless bench, leather seat, ash components and metal base assembly. Dining tables, separate chairs and room accessories are listed independently.
The quotation records the pale saddle leather, dark brushed wood appearance and gray-titanium metal finish. Upholstery edges, projecting end details and exposed support surfaces belong to the same material package.
The schedule carries the 1580 × 450 × 420 mm overall size, bench quantity and room marks. Pairing with a dining table includes its leg spacing and the intended bench position beneath or beside the tabletop.
Packing protects the leather seat, projecting ends and finished legs. Freight and any local receiving or placement are their own items. The agreed delivery format establishes the packed dimensions and route into the room.
The bench is 1580 mm wide, 450 mm deep and 420 mm high. Its width includes the projecting dark ends as well as the upholstered seat.
The selected seat material is saddle leather. Its exact color, texture and edge treatment accompany the bench order as a separate material reference.
The support package includes brushed-finish ash components and a stainless steel base frame with a gray-titanium finish. The component drawing identifies their locations and junctions.
The table layout needs the clear distance between its legs and the intended bench position. The bench overall width is 1580 mm, including its projecting ends. Table support dimensions are separate from tabletop width.
The usable seat length, diner spacing and table support positions determine the intended arrangement for the project.
The bench has its own furniture line. A dining table, chairs, freight and any local placement are each identified when included in the project.
Fabric Lounge Chair and Ottoman with Microfiber Outer Panels
Fabric Armchair with Contrast Piping and a Low Metal Base
Chevron-Quilted Upholstered Bench with Blade Legs
Pleated Leather Armchair with Tapered Metal Legs