Open-Channel Waterfall Basin Faucet with a Metal Trough

A basin faucet with a wide metal trough that carries water into the bowl as an open sheet. Review the single-lever layout, outlet-to-basin fit and access needed around the channel and deck mounting.

Outlet
Open metal trough
Faucet configuration
Brass channel-spout offer with a metal trough, a deck-mounted body and one manual top lever; polished metal appearance.
Control
Single top lever
Faucet configuration Metal Trough / Single Top Lever

Metal Waterfall Faucet Trough, Body & Top Lever

Open Metal Waterfall Trough

The spout is an open metal channel: water runs along the trough and leaves over its broad front edge. That edge sets where the water starts over the basin, so the spout's front projection matters as much as the height of the faucet body.

Deck-Mounted Basin Faucet Body

The body mounts beside the bowl on the basin deck or countertop. The mounting surface needs room for the base, the actual fixing parts and the supply connections below. A vessel basin and a recessed basin place their rims at different heights; the same faucet position does not give both the same outlet clearance.

Single Top-Lever Mixer

The selected configuration has one top lever for manual operation. The lever needs room to travel without hitting a backsplash, mirror ledge or wall. The control is part of the faucet assembly, while supply stops and any additional temperature-limiting device remain separate specified components.

Waterfall faucet side and front layout separating spout reach outlet height basin rim and deck fixing

Open-Channel Basin Flow & Metal Faucet Surfaces

Open-trough and enclosed-spout outlet comparison with cleaning and basin-position differences

Open Trough vs. Enclosed Basin Spout

An open trough shows the moving water and leaves the channel easy to clean. An enclosed spout keeps most of the water path inside the body and usually ends in an outlet insert, so the two differ in cleaning access and outlet geometry.

Polished Metal Channel & Edges

The trough and body have a reflective metal finish, and the channel floor, side walls, front edge and lever are all on show in use. A polished surface shows water marks differently from a brushed one, so approve the finish from the physical surface sample, since screens vary.

Basin Position & Water Landing Area

A broad outlet needs enough basin area beneath it to catch the sheet of water, and a very shallow bowl, steep back wall or outlet close to the rim changes how the water lands. Choose it against the actual bowl profile and faucet position to keep splashing down.

Waterfall Basin Faucet Configuration & Fit

Faucet typeDeck-mounted waterfall basin faucet with an open metal trough and one top lever
Selected configurationBrass channel-spout offer with a metal trough, a deck-mounted body and one manual top lever; polished metal appearance.
Spout material & formBrass channel spout with an open metal trough and a broad outlet edge
Operating controlOne manual top lever; lever travel and backsplash clearance considered with the mounting position
Dimensional scheduleOverall height, deck-to-outlet height, mounting-center-to-outlet reach and base footprint in mm
Basin & deck interfaceBasin rim/bowl position, actual deck thickness, fixing access and underside obstructions scheduled together
Plumbing packageActual hot/cold connections, cartridge, fixing and any supplied hoses itemized; flow/pressure and destination documentation selected for the project
Minimum orderQuoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container.
Standards & certificatesMatched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order.
Waterfall faucet side and front layout separating spout reach outlet height basin rim and deck fixing Open product drawing ↗

Waterfall Faucet Reach, Basin Rim & Deck Access

Spout Projection & Outlet Height

Measure reach from the mounting center to the outlet edge and height from the finished deck to that edge. The basin rim and inside bowl profile are separate reference points. Those dimensions place the water over the bowl while leaving hand space below the spout.

Deck Thickness & Under-Counter Access

The fixing parts must suit the actual basin or countertop thickness. Leave access beneath the body for tightening, supply connections and future removal. A drawer, vanity rail or bowl underside can obstruct that space even when the faucet base fits neatly on top.

Supply Connections & Outlet Flow

We confirm hot and cold supplies, connection sizes and the cartridge package with the faucet assembly. The required flow is assessed with the project water pressure and basin.

Waterfall Basin Faucet Price & Supply

Metal Trough & Body Configuration

Our quotation identifies the open-channel spout, body, top lever and selected surface. A glass trough or lighted outlet is a different configuration and is not part of this metal-trough selection.

Dimensions & Mounting Parts

Overall height, outlet height, reach and base dimensions determine basin compatibility. The actual fixing set and acceptable deck thickness belong with that dimensional package; they are not replaced by a general countertop description.

Connections, Waste & Additional Valves

The supply list names the faucet's fixing and connection parts. A basin waste, trap, supply stops, hoses or extra mixing or limiting valve is included only where itemized, so the faucet and the plumbing installation are priced apart.

Finish Quantity & Delivery

Surface selection, quantity and matching bathroom hardware affect the order. Packing protects the lever and exposed channel edge. Destination, receiving and local fitting are separate from the faucet configuration. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.

Waterfall Faucet, Fixing Parts & Separate Basin Plumbing

Faucet assembly
Metal-trough body, single top lever and selected surface; glass and LED variants excluded from this selection.
Fitting interface
Actual mounting dimensions, fixing set, deck thickness and supply-connection parts as itemized.
Separate plumbing
Basin, waste, trap, supply stops and extra temperature-limiting parts listed as extras.
Order & receiving
Quantity, matching surface reference, protective packing, destination and local fitting.

Metal-Trough Waterfall Faucet FAQs

Is the waterfall trough glass or metal?

This configuration uses a metal trough, with no tempered-glass channel or LED lighting: the open channel, its side walls and front outlet edge form the water path.

Will an open-channel faucet fit a vessel basin?

It can fit a suitable vessel-basin layout, but the rim height, bowl profile, outlet height and spout reach must work together. The fit drawing separates those measurements so the outlet lands over the bowl and leaves hand space below.

Does a waterfall outlet prevent splashing?

No. Basin shape, outlet position, water pressure and flow affect where the water lands. The open trough changes the water presentation.

How does the single lever work with the backsplash?

The selected lever sits above the faucet body. Its complete travel needs clear space around it, including any wall or mirror ledge behind the deck. The mounting center and lever envelope are considered with the basin position.

Is the basin waste included with the waterfall faucet?

The waste and trap are separate plumbing items unless listed in the supply. The faucet package lists its fixing and connection parts, so basin and drain fittings can be coordinated around it.

Can the waterfall faucet be supplied with certified flow and anti-scald control?

Yes. We fit a flow regulator to the flow rate your market requires and can add a thermostatic limiting valve for anti-scald protection. Tell us the certification you need, such as CE or WaterMark, and we confirm which models carry it.

Guides for specifying bathroom faucets

Request a Waterfall Basin Faucet Quote

Metal open-channel waterfall faucet with a top lever flowing into a basin
Open-Channel Waterfall Basin Faucet with a Metal TroughMetal Trough / Single Top Lever
sales@novarmia.com
Open-Channel Waterfall Basin Faucet with a Metal TroughRequest a Quote