Concealed shower layout
The CS-1001/B/G/Q family puts the connections and mixing components inside the wall, with only the overhead outlet, hand shower and controls on show. The family is brass, and the ordered component list defines each assembly and finish, so the shower is chosen as one coordinated package.
The overhead assembly offers rain and waterfall modes. Rain distributes water across the showering area; the waterfall outlet creates a broader stream from the overhead unit. Outlet selection changes the showering experience and the required water path. The overhead assembly, outlet control and pipe routing therefore need to be specified together, including whether the chosen control permits separate or combined operation.
Temperature adjustment and outlet selection perform different jobs. The CS-1001 family is described with thermostatic mixing, an outlet-mode control and a hand shower. The hand shower adds a movable outlet for directed rinsing; its hose, holder and wall connection belong in the component schedule. The selected valve package establishes the operating conditions and control arrangement for these outlets.
The overhead assembly, controls and hand shower share one finish, chosen to sit with the basin faucet, drain and nearby hardware. The order applies that finish to every component, including any exposed hose connection and holder.
The CS-1001 family is brass, and the surface finish is chosen on top. The component schedule lists base material, surface treatment and any accessories with their own materials, so the finish follows every assembly you buy, including parts that sit side by side on the shower wall.
The control trim and the concealed mixing or diverter components must belong to one compatible assembly, which sets handle arrangement, trim coverage, outlet functions and installation depth. The quoted package lists the concealed components with the controls, so wall preparation and final fitting follow the same selection.
| Model & installation | CS-1001/B/G/Q family; concealed shower system with in-wall installation. |
|---|---|
| Selected shower configuration | Brass concealed shower system with overhead rain and waterfall outlets, a hand shower and temperature/outlet controls. Finish identified for the order. |
| Material basis | Brass is listed for the CS-1001 family. The component list identifies the material and surface finish of the ordered assemblies. |
| Shower outlets | Overhead rain and waterfall modes, plus a hand shower. Outlet combinations and operation follow the selected valve and diverter arrangement. |
| Temperature & outlet control | Thermostatic mixing and outlet selection. Valve operating conditions, temperature limits and any required project approvals are specified for the ordered control package. |
| Dimensions & finished wall | Overhead size and projection, trim dimensions, outlet centers and valve setting depth in mm are coordinated with the selected assembly and finished wall build-up. |
| Water & connection interfaces | Hot/cold supply, operating pressure in bar or psi, flow in L/min or gpm, connection size/thread standard and outlet routing are matched to the ordered valve package. |
| Minimum order | Quoted per model at your project quantity. Where a factory model has a production minimum, the quotation states it; small quantities can ship with the rest of your project in one container. |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
Open product drawing ↗
The concealed body is positioned relative to the finished wall surface, including substrate, waterproofing, adhesive and tile. Its setting depth and trim dimensions come from the selected assembly. The overhead outlet height and projection, hand-shower position and control centers are coordinated with the shower layout and user reach. These dimensions belong on the same elevation before the wall is closed.
The mixing valve needs a compatible hot and cold water supply, and the outlets need the required flow at the available operating pressure. Those requirements follow the ordered valve and overhead assembly. The water-system design also accounts for hot-water capacity and the permitted outlet combinations. Connection size and thread standard are selected with the pipework,.
Concealed installation moves the plumbing work behind the finish. The selected valve’s service instructions determine access for maintenance, while the wall detail addresses support and waterproofing around penetrations. In a renovation, the existing valve, pipe locations and wall depth affect the amount of opening and reinstatement work. The new control package is resolved before tile work fixes those interfaces in place.
The price follows the CS-1001 assembly and the number of shower rooms. Our quotation lists the overhead rain and waterfall unit, controls and hand shower, then the concealed mixing and outlet-control components that match them, with hose, holder, wall connection and fittings as their own lines where needed.
The finish applies to every component in each shower room. A repeated bathroom package uses consistent references for the overhead unit, trim and hand shower, with any room that differs noted on its own, and related basin faucets and accessories carry their own models and quantities.
Site cost covers what the concealed assembly needs: wall preparation, fixing support, hot and cold supplies, outlet pipework and installation, with waterproofing and tile reinstatement part of the bathroom works. A renovation reusing an existing concealed valve differs from a new open wall, and all of this is priced apart from the shower components.
Finished surfaces are protected in packing and site storage. Concealed bodies, trim and small connection parts are labeled by room or package so they stay together from rough-in to final fitting, and packing, freight and delivery follow the actual order quantities and destination. Tell us the rooms and quantities and we will put this on one quote with everything else you are ordering, and show you what fits in a container.
The CS-1001 family installs in the wall, with mixing components and pipe connections behind the finished surface and only the overhead outlet, controls and hand shower showing. An exposed system keeps more of the assembly on the wall, so concealed installation means planning wall depth, pipe routing and finish work as well as the fittings.
The family is described with overhead rain and waterfall modes plus a hand shower, thermostatic mixing and outlet selection. Our quotation identifies the actual overhead assembly, valve and trim, hand shower and associated hose, holder and connections. Component quantities and included fittings follow that itemized package.
Only with confirmed compatibility between that valve body and the selected trim. Similar-looking controls can use different stems, fixings, installation depths and outlet arrangements. The existing valve identification and its installation information determine whether it can stay or whether the concealed assembly and surrounding wall work need replacement.
Outlet combinations depend on the selected mixing and diverter arrangement. If combined use is required, the control package, available flow, operating pressure and hot-water capacity need to support that combination before it is included in the order.
Yes. The thermostatic mixer keeps the water at the temperature you set, even when pressure changes elsewhere in the building, which prevents sudden hot surges. Tell us the certification your market requires, such as CE or WaterMark, and we confirm which valves carry it.
Send the number of shower rooms, the bathroom elevation or layout, finish requirements and delivery destination, plus the finished wall build-up, outlet positions, water-supply conditions and connection requirements. We list shower components apart from site plumbing, waterproofing, tiling and installation, so it is clear what each trade covers.
8018 Push-Button Thermostatic Shower Set
Surface-Mounted Stainless Steel Shower Panels
Adjustable Shower Body-Spray Jet Sets
Hand Shower Slide-Bar Kits with Adjustable Holders