10 mm Square-Edge Aluminum Tile Trim with an Anchor Leg
- Selected edge section
- 10 mm high × 10 mm top face; square edge
- Aluminum trim finish
- Silver anodized · 10 × 10 mm square edge · 2500 mm bar
- Selected straight length
- 2500 mm per bar
Our Metal & Glass
20 products
25 mm Stainless Steel Equal-Leg Angle Trim
- Selected material requirement
- Grade 304 stainless steel
- Stainless angle finish
- Brushed silver stainless steel
- Selected nominal wall
- 1 mm
35 mm Aluminum T-Molding for Same-Level Floor Transitions
- Selected material requirement
- 6063-T5 aluminum
- T-molding finish
- Satin-silver anodized aluminum
- Selected cap thickness
- 2 mm
Brass Tube Room Dividers with Open Vertical Spacing
- Divider type
- Fixed decorative interior screen with ten round brass tubes
- Brass Tube Finish and Channel Assembly
- 1000 W x 2400 H x 50 D mm module; brushed brass surfaces
- Tube section
- 20 mm outside diameter x 1.5 mm wall
Bronze-Tone Perforated Metal Wall Panels
- Panel type
- Decorative perforated aluminum wall face with folded returns
- Configuration
- Satin bronze-tone aluminum · 600 × 1200 × 2 mm face
- Selected sheet
- 2 mm aluminum
Custom Laser-Cut Aluminum Room Divider Screen
- Base metal
- Aluminum
- Screen configuration
- Fixed interior screen with patterned laser-cut aluminum sheet and a coordinated frame; actual alloy, sheet thickness, panel sizes, border, finish and fixing details specified for the project.
- Screen type
- Fixed laser-cut sheet
Custom Steel Double-Swing Driveway Gates
- Configuration
- Steel double swing
- Gate finish
- Brown powder coat over hot-dip galvanized steel
- Opening layout
- 3,600 mm clear width
Expanded Steel Mesh Partition Panel
- Panel type
- Raised expanded-steel diamond-mesh decorative partition
- Configuration
- Matte black steel · 1200 × 2400 mm bay
- Selected frame
- 40 × 40 × 2 mm steel
Frameless Glass Railing with Point Fixings and a Metal Handrail
- Support arrangement
- Point fixings
- Glass panels · metal handrail
- Glass panels with exposed round point fixings and a metal handrail; glass build-up, fixing and handrail specification selected for the project
- Panel specification
- Project selected
Horizontal Aluminum Slat Fence Panel
- Assembly
- Fixed horizontal aluminum slat fence bay
- Fence coating color
- Aluminum · matte charcoal powder coat
- Selected posts
- 75 × 75 × 3 mm; 1790 mm post height above 10 mm baseplate
Manual Aluminum Sliding Driveway Gate
- Gate type
- Single manual bottom-rolling aluminum driveway gate
- Configuration
- Matte black aluminum · 4200 × 1600 mm leaf
- Selected leaf
- 4200 W × 1600 H mm; 100 mm closed overlap each side
Recessed Aluminum Shadow-Gap Skirting Profiles
- Profile material and finish
- 6063-T5 aluminum; matte-black finish
- Reveal configuration
- 10 mm reveal ·60 mm rear web ·wall finish ends 30 mm above floor
- Nominal metal wall
- 1.5 mm
Returned Stainless Steel Wall-Mounted Handrail
- Component
- Round wall handrail with returned ends
- Handrail grade and finish
- 304 stainless steel · brushed finish
- Selected run length
- 2000 mm finished length along the run
Solid Oak Oval Wall Handrails with Metal Brackets
- Handrail body
- Solid white oak oval rail with clear matte finish and finished closed ends
- Oak Handrail Bracket Finish
- Clear matte oak rail · brushed 304 stainless brackets and roses
- Oval cross section
- 60 mm horizontal width × 40 mm vertical height
Stainless Steel Cable Railing with Square Posts and a Flat Top Rail
- Selected stainless specification
- 316-grade stainless steel; tube, cable and terminal references coordinated
- Stainless steel finish
- Brushed finish · selected 316-grade stainless
- Selected bay and posts
- 1000 mm post centers; 50 × 50 × 2 mm post section
Stainless Steel U-Channels for Interior Glass Edges
- Channel form
- Open three-sided U section with equal-height legs and connecting base
- Stainless U-Channel Package
- 304 brushed stainless · 20 × 25 mm outside section · 1.5 mm nominal wall · 2400 mm length
- Nominal metal wall and clear width
- 1.5 mm metal wall · 17 mm nominal clear width
Stone-Filled Welded-Wire Gabion Fence Baskets
- Basket construction
- Galvanized welded-steel mesh cage with hinged lid and center diaphragm
- Gabion Basket Supply Package
- One selected basket plus nominal 100–150 mm gray granite stone infill
- Wire and mesh pitch
- 4 mm wire diameter · 50 × 100 mm center pitches
Vertical-Bar Steel Railing Panels with Square Posts
- Railing type
- Welded vertical-bar steel module with square posts
- Steel Railing Finish and Fabrication Package
- 1200 W x 1100 H mm selected module; matte black powder coat
- Posts
- 50 x 50 x 3 mm square steel tube
Welded-Mesh Steel Pedestrian Garden Gates
- Gate type
- Single manually operated welded-mesh pedestrian leaf
- Pedestrian Gate Width and Hardware Selection
- 1000 x 1800 mm leaf;1010 mm inside post span;1130 mm overall
- Perimeter frame
- 40 x 40 x 2 mm steel tube
Woven Stainless Steel Mesh Room Divider Panels
- Infill construction
- Crimped plain over-under woven stainless round wire
- Woven Mesh Divider Panel Package
- 1000 W × 2000 H × 25 D mm · 304 stainless frame and woven mesh
- Frame material and section
- 304 stainless steel · 25 × 25 × 1.5 mm square tube
No products match your search.
Railings, Gates, Screens & Metal Profiles
Railings & Handrails
Point-fixed glass, 316 stainless cable and vertical-bar steel railings guard stairs and balconies; stainless and oak wall handrails run along walls.
Fences & Driveway Gates
Steel double-swing and aluminum sliding driveway gates, aluminum slat fences, welded-mesh garden gates and gabion baskets secure the boundary.
Decorative Room Dividers
Laser-cut aluminum, perforated metal, expanded and woven mesh, and brass tube dividers screen rooms while letting light through.
Metal Edge & Floor Profiles
Aluminum tile trims, stainless angles, T-moldings, shadow-gap skirting and glass U-channels finish the edges between materials.
Metals, Glass & Complete Assembly Components
Base Metals & Surface Finishes
Steel, stainless steel, aluminum and brass are listed by body and grade; bronze or gold describes a finish.
Glass, Timber & Infill
Railing glass is tempered safety glass; tell us the standard your market uses, such as EN 12150 or AS/NZS 2208, and we confirm the glass documents. Handrails come in stainless or solid oak.
Supports & Operating Hardware
Posts, frames, anchors, hinges and rollers are supplied with each assembly.
Metal & Glass Assembly Selection Details
| Detail | What we need from you | Why it matters |
|---|---|---|
| Assembly purpose | What each item is for: guard, gate, divider or trim | Separates decorative and safety functions. |
| Material and finish | Material and finish | Separates metal from finish color. |
| Geometry | Site measurements | Sets component sizes. |
| Supports and connections | Floor and wall construction | Defines anchors and supports. |
| Movement and access | Gate swing or slide space | Fits moving parts to the site. |
| Project requirements | Load and code requirements | Lets us design to your project. |
Metal & Glass Product Package
Fabricated Components
- Panels, frames, posts or profiles by reference
- Glass, timber or metal infill
- Base materials and exposed surface finishes
Connections & Hardware
- Posts, anchors and joints
- Hinges, rollers or other moving parts
- Matching caps, returns and channel accessories
Project & Delivery
- Building support and installation on site
- Component drawings and packing references
- Protective packing and freight
Metal & Glass Package Cost Factors
Material & Section
Metal type, glass build, timber and finish set the price.
Geometry & Fabrication
Panel sizes, curves, cut patterns and frame divisions affect fabrication; gates need more hardware than fixed screens.
Supports & Connected Work
Posts, anchors and special hardware are priced with each assembly.
Packing & Assembly Divisions
Large glass, long profiles and finished frames ship with protection, divided for transport.
Metal & Glass Order Coordination
Define each item
Tell us what each piece is for and where it goes.
Measure and choose
We fabricate to your site measurements in the material and finish you choose.
We resolve supports
We detail fixings, movement and the loads your code requires.
Finishes matched
Finishes are matched to the rest of the building, and pieces ship labeled by location.
Metal & Glass FAQs
What metal is under a gold or bronze finish?
Usually steel or aluminum. We state both base metal and finish.
Can a decorative screen be used as a railing?
No. A railing must be designed for loads and gaps. Choose from our railings for open edges.
Do railings come with anchors?
Yes, matched to your floor or wall. Building reinforcement, if needed, is done on site.
Can manual gates be automated?
Yes, we can quote motors with controls and safety parts.
How do I match a replacement profile?
By height, thickness and fixing leg as well as width.
What do you need to start?
A list of openings or runs, what each piece is for, material and finish, and the supporting construction.