Navy-and-Ivory Face
The same selected navy field and ivory border are used across the size options. Pattern placement is coordinated with the finished rug dimensions.
Flat-Woven Polypropylene Straw Outdoor Rug
The selected body is woven from polypropylene plastic straws, with a nominal 3 mm flat profile. It has a flat woven texture with no tufted pile.
The selected face combines a navy center field, ivory border and navy outer edge. The turned edge shows the reverse weave.
A selected polypropylene binding encloses the rug perimeter. There is no integrated cushion, foam pad or nonslip backing in the selected construction.

The same selected navy field and ivory border are used across the size options. Pattern placement is coordinated with the finished rug dimensions.
The nominal 3 mm woven profile keeps the rug visually flat. Door swing and any required edge restraint still depend on the actual threshold and floor.
An underlay is a separate item when the floor or use requires it. Its grip, drainage and compatibility need to suit the supporting floor and exposure.
| Selected rug construction | Flat-woven polypropylene plastic straws |
|---|---|
| Selected finished size | 1800 × 2700 mm · gross 4.86 m² |
| Selected nominal thickness | 3 mm |
| Selected face | Navy field, ivory border and navy outer edge |
| Selected edge finish | Stitched polypropylene binding |
| Selected reverse | Reverse weave; no integrated pad or nonslip layer |
| Alternative sizes | 1200 × 1800 mm / 2400 × 3600 mm |
| Performance boundary | UV, colorfastness, fire and slip ratings on request; underlay separate |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
The selected 1800 × 2700 mm rug covers 4.86 m². The 1200 × 1800 mm and 2400 × 3600 mm alternatives cover 2.16 m² and 8.64 m² respectively, before any border or furniture placement allowances.
Place the full furniture footprint against the selected rectangle, including chair travel and circulation. Keep the rug flat and use a suitable restraint or underlay, specified on its own, where needed.
Specify the intended exposure, drainage and storage conditions.
List quantities for 1200 × 1800, 1800 × 2700 and 2400 × 3600 mm rugs individually. Quote finished pieces; this is not a cut-roll product sold by gross square meter.
Specify polypropylene straws, nominal 3 mm profile, navy/ivory face and stitched polypropylene binding. Keep the appearance reference with the rug-size schedule.
Itemize any requested underlay, edge restraint and project-required performance documentation.
State any packing-format requirement, protection and destination. Bundle labels should distinguish rug sizes and room or patio references.
It is a selected flat-woven polypropylene plastic-straw rug. It has no tufted pile, natural straw or integral foam cushioning.
The default is 1800 × 2700 mm. The same selected construction is also specified at 1200 × 1800 mm and 2400 × 3600 mm.
The gross areas are 2.16 m², 4.86 m² and 8.64 m² for the three selected sizes. These are overall rectangular areas; usable space after furniture placement is smaller.
No integrated nonslip layer or pad is specified. Any required underlay or restraint is separate and must suit the supporting floor, drainage and use.
Polypropylene resists moisture and fading, and the rug can simply be hosed down. For hotel and commercial terraces, tell us the UV and flammability requirements and we confirm which test reports are available for the rug before you order.
List size quantities, location, intended exposure and any underlay or restraint requirement. Add the navy/ivory appearance reference, required performance documents, packing format and destination.
