3000 mm Round Rug
The default diameter is 3000 mm, with an area of approximately 7.07 m². In the selected layout, a 1500 mm round table leaves 750 mm between the table edge and rug perimeter on every side.
Round Sculpted-Pile Dining Room Rug
Raised fields alternate with narrow linear bands across the round rug. The low-contrast cream palette keeps the relief readable without adding a large color motif beneath the dining table.
The selected construction is a polyester tufted face with 6 mm low pile and 10 mm raised pile above the primary backing. The height change creates the sculpted pattern; these are the specified order values for this configuration.
The selected rug has a textile secondary backing and a color-matched overlocked edge. A separate removable rug pad can be listed for the floor below.

The default diameter is 3000 mm, with an area of approximately 7.07 m². In the selected layout, a 1500 mm round table leaves 750 mm between the table edge and rug perimeter on every side.
A 2400 mm rug covers approximately 4.52 m²; a 3600 mm rug covers approximately 10.18 m². These diameter options retain the same cream texture, tufted construction and edge treatment on this page.
The geometric band layout must be set to the selected diameter. The color and pile sample belongs with that layout so the larger diameter does not simply stretch the motif or change its raised-to-low pile balance.
| Selected construction | Polyester tufted sculpted-pile area rug |
|---|---|
| Round rug diameter | Cream sculpted pile · 7.07 m² approx. |
| Selected pile heights | 6 mm low / 10 mm raised, above primary backing |
| Selected secondary backing | Textile backing; separate removable pad if ordered |
| Selected edge finish | Color-matched overlocked circular perimeter |
| Visual direction | Cream geometric relief with linear bands |
| Supply unit | One finished loose round rug; furniture and pad listed on their own |
| Specified application | Indoor loose area rug; outdoor and routinely wet areas excluded |
| Standards & certificates | Matched to the ordered model: tell us the standards or certificates your market or project requires, and we confirm in writing which documents are available for this configuration before you order. |
The circular layout shows the rug and table footprints as two outlines. Measure to the rear of each chair when it is pulled out for use; a 750 mm table-to-rug margin is a geometric result of the shown dimensions, so check the chairs against it.
The rug pad, floor finish and door swing sit outside the rug’s pile specification. Identify the floor material and any doors crossing the rug so backing contact, pad thickness and edge clearance can be reviewed together.
The rug is a finished loose floor covering, laid without adhesive and distinct from wall-to-wall carpet or carpet tile. Tables, chairs, floor preparation, installation and a rug pad are outside the rug price unless each is listed in the quotation.
Price the selected diameter and finished rug count, with the cream pattern and edge treatment on one specification. Record any other diameter as an alternative in the same quotation.
The selected polyester face, 6/10 mm pile profile, textile secondary backing and circular edge define this request. Any material or construction substitution changes the specification and needs approval before production.
List rolled packing, rug identification, separate pads if requested, and the delivery destination. Packing dimensions, gross weight, production schedule and freight are order-specific quotation items.
Keep the approved diameter, sculpted pattern, pile heights, backing and edge reference with a repeat request. Price any changed face or backing as its own construction, so no unmarked substitution replaces the approved rug.
This configuration specifies a polyester tufted face, 6 mm low pile, 10 mm raised pile, textile secondary backing and an overlocked circular edge. The cream geometric texture is the visual direction; the order specification and approved sample identify the final material and construction.
This page compares 2400 mm, 3000 mm and 3600 mm diameters. Their approximate areas are 4.52 m², 7.07 m² and 10.18 m². The 3000 mm diameter is the default selected configuration.
That depends on the table and chair dimensions. A 1500 mm round table centered on a 3000 mm rug leaves a 750 mm radial margin. Measure the chair in its pulled-back position before choosing the rug.
A removable rug pad is a separate line item, selected for the floor finish and required finished height.
This is an indoor loose area rug configuration. It is a different product from an outdoor woven-plastic rug or wet-area flooring. Outdoor use, routine wetting and hose cleaning are outside its specified use.
Include the selected diameter, rug count, table diameter, pulled-back chair footprint, floor finish and destination. Add any fire, emissions or other project requirement so the necessary product-specific documents can be identified.