1200 mm Fixed Length
The main board is 1200 × 90 × 20 mm. Its fixed length, plain ends and continuous long-edge grooves are carried on the joist and clip layout.
Solid Teak Clip-Fixed Terrace Floorboards
Solid Teak Clip-Fixed Terrace Floorboards
- Board timber and finish
- Solid teak through 20 mm thickness; natural-oil face
- Board length
- 1200 L × 90 W × 20 T mm solid teak ·4 mm side gap
- Long-edge grooves
- 4 H × 5 deep mm, centered; 8 mm wood above and below
Solid Teak Boards with Centered Side Grooves
20 mm Solid Teak Section
Each board uses teak through its full 20 mm thickness, with a 90 mm face and square ends. The natural-oil finish brings out the wood grain across the face and exposed edges.
Centered 4 × 5 mm Side Grooves
A 4 mm-high groove runs 5 mm into each long edge. Centering that groove within the 20 mm board leaves 8 mm of wood above and below it for the matched fixing detail.
Hidden Stainless Clips and 4 mm Gaps
Matched stainless clips engage the side grooves and set 4 mm clear gaps between neighboring boards. The resulting repeated left-edge pitch is 94 mm for a 90 mm board face.
Three Fixed Board Lengths for Terrace Layouts
1800 mm Fixed Length
The 1800 mm format extends the same section and gap pattern along a longer run. End joints and support locations follow the terrace board schedule.
2400 mm Fixed Length
The 2400 mm format retains the 90 mm face and 20 mm thickness. Its handling, end cuts and support positions are identified with the longer board reference.
Teak Board Section, Gap and Repeated Pitch
| Board timber and finish | Solid teak through 20 mm thickness; natural-oil face |
|---|---|
| Fixed board length | 1200 L × 90 W × 20 T mm solid teak ·4 mm side gap |
| Face and overall thickness | 90 W × 20 T mm |
| Long-edge grooves | 4 H × 5 deep mm, centered; 8 mm wood above and below |
| Clear side gap | 4 mm with matched stainless clip/spacer |
| Repeated pitch and field width | 94 mm pitch; ten boards +nine gaps =936 mm |
| Fixing interface | Side-groove clips, board ends and joist supports on terrace layout |
| Supply unit | One length-scheduled board; matched clips and supporting components itemized by run |
Open product drawing ↗
Joist Supports, Clip Lines and Terrace Edges
Locate Board Ends on the Joist Plan
The supporting layout positions joists, board ends, edge members and clip lines. Joist spans, connections and required structural data are matched to the actual terrace and board assembly.
Take Off Width from Faces and Gaps
For a field of n boards, the width is 90n + 4(n − 1) mm before perimeter allowances. Ten boards and nine side gaps therefore occupy 936 mm, a little less than ten full 94 mm pitches.
Coordinate Movement and Exposed Edges
The terrace detail locates perimeter movement, drainage, board-end joints and exposed cut edges. Timber grade, moisture reference, oil treatment and the matched groove/clip sample remain with the order.
Clip-Fixed Teak Floorboard Supply Schedule
Fixed Lengths and Board Quantities
List 1200, 1800 or 2400 mm boards against each terrace run. Include cut lengths, end joints, retained spare boards and the 90 mm face takeoff.
Teak Section and Oiled Finish
Quote solid teak, 20 mm thickness, 90 mm face and centered 4 × 5 mm side grooves. The accepted material reference records natural grain, grade, edge finish and oil appearance.
Clips and Support Interfaces
Count matched stainless clips from the board/joist intersection layout. End fixings, perimeter details, joist members and attachment hardware have their own schedule lines.
Long-Board Protection and Delivery
Support boards during packing and protect the finished faces and grooved edges. Mark lengths, run references, board/clip counts and destination on the bundle schedule.
Teak Terrace Board Order Configuration
- Boards
- Fixed length, run layout, cutting, board count and spares
- Timber
- Solid teak, 90 × 20 section, side grooves, grade and oil reference
- Fixings
- Clip/joist intersections, 4 mm gaps, end fixings and perimeter movement
- Delivery
- Length/run labels, groove/face protection, bundle counts and destination
Teak Terrace Floorboard Questions
What is the board section?
The solid-teak board has a 90 mm face and 20 mm overall thickness. The three fixed lengths are 1200, 1800 and 2400 mm, all with square ends.
How are the side grooves dimensioned?
Each centered long-edge groove is 4 mm high and 5 mm deep. The 20 mm section leaves 8 mm of wood above and 8 mm below the groove.
How wide is the joint between boards?
The matched stainless clip/spacer sets a 4 mm clear side gap. That gives a 94 mm repeated pitch from one board edge to the next.
How is the width of a complete board field calculated?
Use 90 mm for each board and 4 mm for each internal gap. Ten boards have nine gaps, so their width is 900 +36 =936 mm before perimeter allowances.
How are clip quantities and board ends scheduled?
The terrace plan locates board/joist intersections, end joints and perimeter fixings. Clips are counted from that layout, with support and attachment details assigned to the actual construction.
What material references accompany the order?
The order retains teak grade and natural variation, moisture reference, oil appearance, exposed-edge finish and a matched groove/clip sample. Board lengths, spares, packing and run labels use those same references.
More Solid Hardwood Flooring
Solid Walnut Basketweave Parquet Blocks
Natural Solid Maple Narrow-Strip Flooring
Natural-Finish Solid Oak Floorboards
End-Grain Oak Flooring BlocksRequest a Teak Terrace Floorboard Quote
Solid Teak Clip-Fixed Terrace Floorboards1200 mm boards